CE Smith Vertical Bunk Bracket for Boat Trailers - Galvanized Steel - 7-1/2" Tall - Qty 1

CE Smith Boat Trailer Parts - CE10603G

Mount a bunk board on its skinny side to a crossmember of your boat trailer with this bracket. Use 1 bracket to allow the bunk board to pivot, or use 2 brackets for a fixed board. Slotted mounting hole lets you adjust the height during installation.

Features:

• Heavy-duty bracket mounts vertically to your boat trailer's crossmember, allowing you to mount a bunk board on your boat trailer at the perfect height
  • Single bracket enables bunk board to pivot during loading
  • Stabilizes bunk board when 2 brackets are used (other bracket sold separately)
  • Does not include mounting hardware
• Dimpled design keeps bracket from sliding along trailer frame
• Slotted hole permits as much as 4-3/8" height adjustment during installation
• 11-Gauge galvanized steel construction is sturdy and resists corrosion
• Made in USA

Specs:

• Quantity: 1 bracket
• Height: 7-1/2"
• Inside width: 1-3/4"
• Dimensions of mounting slot: 4-3/8" long x 7/16" wide

Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer.

Galvanized Steel

Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mm to 5 mm thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.

10603G 11-Gauge Galvanized Steel Replacement Vertical Bunk Bracket by CE Smith - 7-1/2" Tall

Customers compare CE10603G to these similar products

CE Smith Bolster and Swivel Bracket Assembly for Boat Trailers - Galvanized Steel - 9" - Qty 1$7.99

Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741$10.99

CE Smith Bolster Bracket for Boat Trailers - Galvanized Steel - 8" Tall - Qty 1$3.09

Slotted Bunk Bracket for Boat Trailers, by Dutton-Lainson$9.99

CE Smith Vertical Bunk Bracket for Boat Trailers - Galvanized Steel - 8-1/2" Tall - Qty 1$6.99

Customers Who Purchased This Boat Trailer Parts Also Bought...

Trailer Square U-Bolts (Qty 2), 2-1/8" x 4" x 7/16" $12.99

CE Smith Vertical Bunk Bracket for Boat Trailers - Galvanized Steel - 12-5/8" Tall - Qty 1 $7.49

Trailer Square U-Bolts (Qty 2), 3-1/8" x 3" x 7/16" $14.49

CE Smith U-Bolt - Zinc-Plated Steel - 3" Long x 3-1/8" Wide x 7/16" Diameter - Qty 1 $5.99

Replacement Wheel Stud, Screw-In, 1/2" x 2" $3.39

Ask the Experts about this CE Smith Boat Trailer Parts

Do you have a question about this Boat Trailer Parts?