Curt Accessories and Parts - C31010
Curt Trailer Hitch Electric Winch Mount Plate
- 2" Hollow shank fits into trailer hitch receiver
- Long shank has 3 adjustable mounting holes to accept a wide variety of winch models
- Durable, black powder coat finish resists corrosion
- Roller fairlead mounting points
- Updated design accommodates newest roller fairleads
- Optional handle/guard kit C31005 makes transportation easy and protects the valuable winch
- Universal design supports most major winch models
- Distance from the center of the pin holes to the back of the shank: 1-1/8", 3-1/8" and 5-1/8"
- Plate is 1/4" steel
C31010 Curt Trailer Hitch Electric Winch Mount
Replaces # C31004
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Curt Accessories and Parts
Do you have a question about this Accessories and Parts?
- Curt Trailer Hitch Winch Mount C31004 has a Capacity of 9,000 Pounds Straight Pull
- This Curt Trailer Hitch Winch Mount, part # C31010 has a capacity of 9,000 pounds straight pull. You will need to find the weight capacity of the hitch as well, and compare the capacities, using the lowest limiting factor. We do not sell Warn winches, so I am not completely sure if this mount is compatible with a Warn winch. However, the first set of mounting holes are 10 by 4-1/2 inches, and the second set of mounting holes measure 6-1/2 by 4-1/2 inches center to center. In general, you will ne
view full answer...
- What is the Bolt Pattern Dimensions of the Curt Trailer Hitch Electric Winch Mount Plate # C31010
- I spoke with my contact at Curt to determine the bolt hole dimensions of this Curt Trailer Hitch Electric Winch Mount Plate # C31010 and he sent me a drawing that has all of the bolt hole dimensions. Check it out, I attached it to this page.
As you can see this mounting plate would not work for your winch, the winch plate that would work dimensionally with your winch would be the ATV 1-1/4 inch Hitch Winch Mounting Plate # TR65850. The mounting bolt hole dimensions of this winch plate are 3 i
view full answer... 
- What is the Correct Mounting Plate for a Superwinch S5000 Electric Trailer Winch
- The 2 mounting holes on the bottom of the Superwinch S5000, # 1450200, are 3.69 inches apart on center (3-11/16). The holes on the CURT Winch Mount, are wider at 4-1/2 inches apart on center and are not in the correct pattern.
For the S5000, you will need Superwinch Hitch Mounted Winch Plate with Handle, # SW2055, which has the correct mounting pattern for your winch.
view full answer...
- Distance of Hitch Pin Holes from Mounting Plate on CURT Trailer Hitch Electric Winch Mount Plate
- I went out to the warehouse and pulled a CURT Trailer Hitch Electric Winch Mount Plate, # C31010, to measure it. From the back of the mounting plate to the center of the nearest hitch pin hole, it is 4-1/4 inches. -The distance to the center hole is 6-1/4 inches. And to the last hole it measures 8-1/4 inches.
I made a picture and a short video showing the measurements for you.
view full answer... 
- Availability of Winch Plate Front Mounting Adapter for 2004 Chevrolet Silverado
- I have a selection of front mount hitch mounting plates to choose from. I am including a link to a product page that will list the choices of mounting plates.
Our two most popular mounting plates for front mount hitch is the CURT Trailer Hitch Electric Winch Mount Plate, part # C31010, that you have referenced and the Draw-Tite Front Mount Trailer Hitch Winch Mount Plate, part # 6495.
You will need to match up the mounting hole dimensions on your electric winch to the mounting hole dimensi
view full answer... 
