Sealed, 6" Oval, LED Trailer Utility Light, Adhesive Mount, 10 Super Diode - Clear

Optronics Trailer Lights - BUL78C3MB

7-9/16" L x 3-5/16" W x 3/4" D; sealed; waterproof; 3-wire; 10 clear, super LEDs; clear lens

Features:

• Clear, 6" oval utility light
  • Not certified for backup light function
• Great replacement for incandescent lights
  • No bulbs to replace
  • No brittle filaments
• Crystal Clear (TM) lens
• Sealed, waterproof housing and lens
• Flange or surface mount
  • No panel cutout required with surface mount
  • Heavy-duty adhesive back
    • Easy, hardware-free application
• 2-Wire design includes lead wires and separate ground wire
• 10 Clear super LEDs (Light Emitting Diodes)
• 7-9/16" Long x 3-5/16" wide x 3/4" deep
• LED light draws 0.080 amps at 12.8 volts
• DOT approved
• Lifetime warranty on LEDs

Manufacturer Cross Reference

• This light functions as an exact replacement for:
  • Wesbar EZ

Sealed, flange mount, clear LED utility light. Ten super diodes for bright, dependable performance. Surface mount does not require panel cutout.

Features sonically sealed, waterproof lens and housing in a single unit. All-weather, molded plastic housing and durable lens protect against corrosion.

Not certified for backup light function. Separate ground wire. Includes 3-way, female, molded plug with heavy-duty adhesive for easy, hardware-free application.

BUL-78C3MB Optronics Sealed, 6" Oval LED Trailer Utility Light, Adhesive Mount, 2-Wire, 3-way Female Plug, 10 Super Diode - Clear LEDs with Clear Lens

Video of Sealed, 6" Oval, LED Trailer Utility Light, Adhesive Mount, 10 Super Diode - Clear

Customers Who Purchased This Trailer Lights Also Bought...

Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Lights?

• Can I Use Optronics LED Trailer Utility Light # BUL78C3MB On My Garden Tractor for Illumination
  
• The item you selected, Sealed 6 Inch Oval LED Trailer Utility Light, part # BUL78C3MB, draws .080 amps at 12.8 volts. The white wire is the ground wire and the red wire is the power wire. You would attach the white wire to a good ground connection point on the tractor and run the red wire to the battery of the tractor. If you want to be able to turn the light on and off, you can use a simple switch like part # D16740.
  view full answer...


• Backup Light Recommendations for a Enclosed Utility Trailer
  
• I spoke with my contact at Optronics and he informed me that this Optronics Trailer Light, part # BUL78C3MB, is certified to be used as a utility light for a trailer but not as a reverse light. He said that if you were to use this as a reverse light he would recommend that you contact your state and local laws to determine if that would be an issue for passing inspections. He also said that these lights will not be as bright as most reverse lights normally are. If you want a similar light
  view full answer...


• What does Super LED mean in the Optronics Sealed Super LED Trailer Light # BUL78C3MB
  
• I spoke with my contact at Optronics and he said that the Super LEDs in the Optronics Sealed Super LED Trailer Light, part # BUL78C3MB, are brighter than the normal LEDs. He gave me a candela output rating on the Super LEDs as 125 cd. He said the candela is the luminous intensity of the light. For comparison he said the candela output on a 100 watt incandescent light bulb in your home is 100 cd.
  view full answer...


• Is the Oval LED Trailer Utility Light a Flood or Spot Light Style for Interior Trailer Lighting
  
• The Oval, LED Trailer Utility Light, item # BUL78C3MB, is designed as an area light, more like a flood than a spot light, and would be a good choice for interior lighting in an enclosed cargo trailer. The Straight 3-Wire Pigtail, item # A45PB, can be used for wiring this light. This LED light could be spliced into the tail light circuit, so the lights can be activated with the vehicle tail lights. A switch inside the trailer would be needed so that the lights are not on when traveling down the r
  view full answer...