See What Fits Your Vehicle
customer service | view cart  View Cart

Accessories and Parts > Hitch Bike Racks > Accessories > Storage > Bike Rack Storage > Wall Mounted > Thule, Yakima > 2 Accessory Capacity > Boone Outdoor

Boone Hang2 - Wall Mounted Bike Rack Storage - Newer Thule and Yakima Racks

Boone Outdoor Accessories and Parts

Rating: ratingratingratingratingrating
3 reviews


Code:   BH90H3FS

Price:$19.95

Shipping Weight: 3 pounds

Shipping Special
Quantity: 




Boone Outdoor Accessories and Parts - BH90H3FS

For Saris, Thule and Yakima racks that fit both 1-1/4" and 2" hitches, the Hang2 will safely store your bike rack and one other hitch accessory up and out of the way.

Wall Mounted Storage for Saris, Thule or Yakima Bike Racks - Hang2 by Boone Outdoor Hardware

Hang2 easily stores two hitch-mounted racks or accessories. This laid-back little guy hangs out anywhere you have wall space. When Sports Racks and Cargo Carriers are off your vehicle they are awkward, unwieldy and create a hazard on the garage floor. Securely store and organize bike racks, cargo carriers, tailgate tables, ski/snowboard racks, draw bars and other hitch gear. Don't make waves with a cluttered garage. Hang2 dude!

  • Maximize Limited Storage Space
  • Keep hitch gear easily accessible
  • Store bulky racks up out of your way
  • Quick side-loading design makes mounting the most cumbersome hitch mounted racks a snap
  • Store 1 Saris, Thule or Yakima rack and 1 other standard 2" hitch accessory
  • Designed for Saris, Thule and Yakima Bike Racks with a 1-1/4" shank and 2" adapter sleeve
    • Pin diameter: 0.37"
    • Not compatible with the Thule Apex bike racks because they do not have a hitch pin hole in the shank
  • Quickly mounts to any available wall space
  • Load capacity: 90 lbs

902HS Wall Mounted Storage for Thule or Yakima Bike Rack with Bike Rack Shoulder Pin - Hang2 by Boone Outdoor Hardware





Video of Boone Hang2 - Wall Mounted Bike Rack Storage - Newer Thule and Yakima Racks


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of boone bike docking station BH90H3FS
Boone Hang2 Wall Mounted Bike Rack Storage Review

Video Transcript for Boone Hang2 Wall Mounted Bike Rack Storage Review

Today we are going to cover part number BH90H3FS from Boone Outdoor Hardware. What this is, is a wall mount that actually holds up your bicycle rack or other hitch accessories, such as a cargo carrier or ball mounts. On this part number, we actually have a special pin design for Yakima and Thule and Ceres bicycle racks, because their anti-rattle hitch bolt designs require a little-bit-different pin. We will go ahead and show you how it works and how it gets installed.

All right, we have our unit here, mounted onto the wall already. Take your first pin with the even shoulders and install your clips, one on each side. And they just snap into place. And then we will take our second pin, and the same thing applies. Again, reinstall your little clips. Now, the major difference is this special pin right here. It has a full shoulder that goes all the way back to the mount here. Basically, what that is designed for is to put on bicycle racks that have the threaded fittings where it goes into the hitch tube itself. So if you have an anti-rattle hitch bolt, this is the mount for you.

We will go ahead and install this Yakima brand rack. And once you have it in place, you secure it with the safety pin. And there you have it: stored until you are ready to use it. Next, we will try out a sport rack wheel-mount rack. Now we will try a Thule rack. As you can see here, this fits a wide variety of bicycle racks. And as we mentioned earlier, this will also fit a Ceres brand bicycle rack with the same bolt-on hitch-pin configuration. And there you have it for cover part number BH90H3FS from Boone Outdoor Hardware.


Customers compare BH90H3FS to these similar products








Customers Who Purchased This Accessories and Parts Also Bought...






Customer Reviews

Boone Hang2 - Wall Mounted Bike Rack Storage - Newer Thule and Yakima Racks - BH90H3FS

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (3 Customer Reviews)




- BH90H3FS

ratingratingratingratingrating by: Mitch10/31/2012

Is this review helpful?


Wall hanger arrived in 2 days. Worked as described. 58532

comment on this review


- BH90H3FS

ratingratingratingratingrating by: T-Bone05/24/2012

Is this review helpful?


Perfect item for storing my Thule rack off the ground and out of the way. I was very skeptical about the little screws it came with so I used 1/4" x 4" lag screws instead and it feels rock solid. I mounted it to a 4x4 piece of wood that I bolted to my storage shelf as I didn't have any open wall space.41591

comment on this review

Comments

spec on hang2 is 90lbs or 45lbs per side - I have the same Thule rack which weighs 60-65 - concerned it will bend the bracket and or worse tear-off the wall - will be mounting thru drywall into 2x6 stud. Anybody else had good luck exceeding the bracket specs?

comment by: bruce - 11/20/2012


444

You are correct, it should be a maximum load of 45 pounds per side. I weighed our TH916XTR and it came in at 48 pounds. It is close but still over.

Patrick B - 11/20/2012





- BH90H3FS

ratingratingratingratingrating by: Todd P01/23/2012

Is this review helpful?


This is a really great solution - simple to install, simple to use. The eTrailer.com order experience was superb - couldn't be happier!30203

comment on this review


Ask the Experts about this Boone Outdoor Accessories and Parts


  • Is the Boone Hang 2 Wall Mounted Bike Rack Storage # BH90H3FS Good for a Softride Element Bike Rack
  • Yes, the Softride Element Parallelogram Tilting 4 Bike Rack for 1-1/4 inch and 2 inch Hitches, item # SR26248, will work on the Boone Hang2 - Wall Mounted Bike Rack Storage - Newer Thule and Yakima Racks, item # BH90H3FS. You could store this rack and another rack, or accessory, that has either a 1-1/4 inch or 2 inch shank on it. I have posted a video below for you to review the use of the Boone Hang2 - Wall Mounted Bike Rack Storage.
    view full answer...

  • Can the Boone Hang2 Be Used to Store Bikes While They are Attached to the Rack
  • Having the bike racks unfolded and holding bikes while using the Boone Hang2 most likely would not work well for you. The weight itself would not necessarily be the problem, but the torque and leverage applied to the wall mounted bracket would most likely tear the bracket out of the wall. The Hang2 is designed to hold the rack for storage, but was not meant to be used while the bikes are attached to the rack. An item like the Boone Dock Bike Rack Storage, part # BH91411 would be a much better
    view full answer...

  • Will the Boone Hang2 Or Swagman X Mount Bike Rack Storage Rack Work with the Thule Apex Bike Racks
  • I went out to the warehouse and pulled the Boone Hang2 - Wall Mounted Bike Rack Storage Rack, # BH90H3F, and the Swagman X Mount, # S80940, and checked both using a Thule Apex Swing bike rack, # TH9027. I found that the Boone Hang2 rack will not work because there is not a through hitch pin hole in the shank of the Apex line of bike racks. When I checked the Swagman X Mount, it worked nicely with the Apex rack and has a capacity of 100 lbs. so it would work fine with the Apex shank and EasyMo
    view full answer...

  • Bike rack Storage for a Yakima SwingDaddy Trailer Hitch Mount Bike Rack
  • Since the Yakima SwingDaddy, # Y02422, only fits 2 inch trailer hitches but uses a 1/2 inch threaded bolt to mount to a hitch receiver. The Hang2 # BH90H3FS you referenced is designed for racks that will fit both 1-1/4 and 2 inch trailer hitches but uses a 1/2 inch pin. The issue is the weight capacity. The Hang2 has a capacity of 45 pounds per side so you would be slightly over that and because of this I do not advise using this unit. What I recommend is the Docking Station, # BH92422, with
    view full answer...

  • Wall Mounted Bike Rack Storage for a Thule Helium Aero
  • The Thule Helium Aero, # TH9042 or # TH9043 will not work with the Boone Hang2, # BH90H3FS, because of the integrated hitch pin design on these bike racks. What I recommend is the Swagman X mount, # S80940. I have included a link to the installation instructions for you. Be sure to secure the mount to a stud in the wall.
    view full answer...


Info for this part was:


Written by:
Ty

Edited by:
Fran

Test fit by:
Rick

Video by:
Zack

Expert Research
Bob

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com