Brophy Enclosed Trailer Parts - AS24
Aluminum Scissor Steps
- Features:
-
- Light weight steps are manufactured from heavy gauge aluminum
- Stairs self-adjust to the terrain and fold for easy storage
- Comes fully assembled
- Easy to install and use
- Universal mounting applications
- Each step has a non-slip stair tread
- Optional hand rail available - sold separately
- Specs:
-
- 4 Step
- Extended vertical height measures between 31" and 39" high
- Step size: 24" wide x 8-3/4" deep
- Step traction pad measures 8-1/2" deep
Note: This step is only to be used while vehicle is stationary and should not be mounted permanently. Use mounting bracket provided so step is easily removed prior to vehicle travel. For recreational use only. Not for commercial applications.
Steps fold up to take up very little storage space. Mounting bracket and hardware is included.
A tab is used to help keep the stairs compact during transportation.
A close-up of the stair mounting bracket. Screws are included to aid in the installation.
Customers Who Purchased This Enclosed Trailer Parts Also Bought...
Replacement parts available for this product
Ask the Experts about this Brophy Enclosed Trailer Parts
Do you have a question about this Enclosed Trailer Parts?
- Aluminum Scissor Steps and Hand Rail Measurements
- You are correct the Aluminum Scissor Steps, 24 inches Wide, 31-39 inches Tall, part # AS24, can be fully extended to 39 inches tall, or can be slightly compressed so that they measure 31 inches tall. You will need to measure from the ground to the bottom of your camper door to see what height you need. We do sell the matching handrail, it is the Aluminum Hand Rail for 4 Step Scissor Stair, item # AHR4 and it is custom fit to these stairs.
view full answer...
- Scissor Step Stair Bracket Dimensions
- The AS24 mounting bracket is 25 inches long and 1-1/2 inches wide and should be placed 1/8 inch below the lowest part of the door on your RV.
view full answer...
- What Size Scissor Steps for Rear Ramp of Toy Hauler 32 inches From Ground?
- If 32 inches is the height unloaded, I think you are cutting it too close. With your toy hauler loaded, the height will definitely shorten a few inches. You would be better off with the smaller one that is 24 to 30 inches tall. You could mount the steps a little lower to accommodate the unloaded height of the toy hauler.
The Aluminum Scissor Steps, 24 inches wide, 24-30 inches tall (part AS23) can be fully extended to 30 inches tall, or can be slightly compressed so that they measure 24 inche
view full answer...
- Installation of the Aluminum Scissor Steps # AS24
- The Aluminum Scissor Steps, 24 inch Wide, 31 inch - 39 inch Tall, are not designed to hang. These steps are designed to fit just below the door of the RV and contact the ground for support. There is a bracket attached to the RV so the stairs can be easily installed and removed.
view full answer...
- Will Brophy Aluminum Scissor Steps, # AS24, Work On Boat Trailer
- The Brophy Aluminum Scissor Steps, # AS24, fully extended is 39 inches tall and can be slightly compressed to 31 inches. If you are mounting the bracket to your boat trailer, you should measure from where the bracket will mount on the trailer down to the ground to see if these dimensions will work.
If after you measure, you need a different size we do have other sizes available in the scissor steps. The Brophy, # AS02, has a extended height of 18 inches to 23 inches, the Brophy, # AS23, exte
view full answer... 
- Weight of Folding Aluminum Scissor Steps # AS24
- Yes, I went out to the warehouse and took the stairs only out of the shipping box and weighed them on a postal scale. The stairs only, no mounting bracket or hardware, weigh 23.80 pounds.
You may also be interested in the Aluminum Hand Rail for 4 Step Scissor Stair, item # AHR4, for safety when using the aluminum scissor steps.
view full answer...
- Weight Limit for the Aluminum Scissor Steps # AS24
- The weight capacity of the Aluminum Scissor Steps, item # AS24, is 300 pounds.
view full answer...
- What is the Maximum Weight Capacity on the Brophy Aluminum Scissor Steps # AS24
- I spoke with my contact at Brophy and they said the maximum weight capacity of the Brophy Aluminum Scissor Steps, part # AS24, is 300 lbs.
If you are needing a hand rail for the aluminum steps I would recommend the Brophy Aluminum Hand Rail for 4 Step Scissor Stair, part # AHR4.
view full answer...
- Availability of Scissor Steps That Mount Underneath the Camper
- The mounting bracket on the Brophy Aluminum Scissor Steps, part # AS24, is 25 inches long and 1-1/2 inches wide and should be placed 1/8 inch below the lowest part of the door on your RV for installation.
The steps I have that are made to bolt or weld onto the trailer frame are the Stromberg Carlson brand. They will only have single, double, and triple steps. I am including a link to a product page that will list all of the Stromberg Carlson steps I have available.
I also have the Outrigg
view full answer...
