Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop
(66 reviews)
Price: $299.71
In Stock
Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop
Item # AM3400
Our Price: $299.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (66)
- Q & A (0)
- Photos
Andersen Trailer Hitch Ball Mount - AM3400
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 3 Inch
- Rise - 4 Inch
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- 10000 lbs GTW
- Class IV
- Andersen
- Built-In Locks
- Aluminum Shank - Silver
- Steel Ball
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 3-1/2" drop and 4-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.
Features:
- Adjustable, aluminum alloy ball mount fits 2" x 2" trailer hitch receivers
- Strong, lightweight, looks great and will not rust
- Ball mount adjusts in 1" increments up to 3-1/2" drop and 4-1/2" rise (locking adjustment pin included)
- Recommended for vehicles with 20" or less from the ground to the top of the receiver opening when vehicle is level (includes many light-duty trucks and SUVs)
- Allows towing of various trailers with the same ball mount
- 2 Hitch pin holes allow for further adjustment
- 2 Zinc-plated steel hitch balls included
- 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other
- Hitch-balls secure to ball housing with internal pin (included) that allows for easy interchangeability
- Additional ball sizes can be purchased to replace the originals
- Locking pin set deters theft
- Hitch receiver lock secures ball mount shank to hitch receiver
- Locking adjustment pin secures ball housing to shank
- 2 Keys (included) are keyed alike
- Made in the USA
- 1-Year limited warranty
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity
- 8,000 lbs GTW with 2" hitch ball
- 10,000 lbs GTW and 1,500 lbs TW with 2-5/16" hitch ball
- Maximum rise: 4-1/2"
- Maximum drop: 3-1/2"
- Measurement from center of short hitch pin hole to center of ball hole: 8-1/4"
- Measurement from center of long hitch pin hole to center of ball hole: 9-5/8"
3400 Andersen SUV Rapid Hitch Kit w/ 2" x 2-5/16" Ball Combo - Zinc Plated Steel (Kit Includes Locking Pin Set), 3-1/2" Drop
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Defective
Customer Reviews
Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop - AM3400
Average Customer Rating: 5.0 out of 5 stars (66 Customer Reviews)
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 3-1/2" drop and 4-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.by: J Howze11/29/2023
This hitch is extremely well made and makes it very easy to go from towing a lightweight storage trailer with my SUV and heavy towing with my 3/4 ton pickup. Switching ball sizes is a breeze. I highly recommend this hitch
by: Austin 11/26/2021
Hitch is built well. Looks great, easy to adjust. I love the locks. Shipping was very fast. Only downside is the price.
by: Patty 02/20/2023
The Trailer hitch arrived exactly when they said it would and it is Perfect!
by: Rich C03/30/2015
Arrived as expected. Big and beefy and will have no problem hauling my 8000 lb trailer.
by: Teresa 07/01/2023
My husband absolutely loved it! Thank Y ou!
by: Angus06/05/2020
It was easy to find the product that I wanted from several choices. The order process was as expected and it arrived on time. Well boxed and in new condition. I appreciate the service that I received when I had a technical question on the product. I have ordered multiple products over the years from etrailer.com and all have been a good experience. I would recommend etrailer.com to anyone.
by: Barry B.04/29/2015
etrailer is great to order from. They do as they say they will do and in my case the hitch receiver was received quick, and it is a great value and beautiful.
Thanks etrailer!
by: Monte R.07/24/2015
Good quality ball/hitch with high tow capacity rating. Needed something for my different height trailers, and this works perfectly.
by: Bill B09/11/2017
It was easy to adjust and worked great when in use. Took the place of 2 tow balls that I used for towing 2 different trailers.
by: Jimmy R05/02/2012
I bought this for my new FX4 because wanted something that would perform well and look great too. I haven't had an opportunity to tow with it yet but the initial quality and apperance is impressive. The service and speed of shipping from etrailer was excellent as well.
by: Edward11/30/2017
Easy to adjust to different trailers without special tools. Very heavy duty and looks good.
by: Theresa 12/15/2022
Great customer service and quality.
by: Rick12/09/2014
Very nice and as expected from E-trailer. Thank you!!!
by: Andrew C02/23/2015
Excellent product! Depending on what I'm towing I can set the hight exactly where I need it to be, and quickly!!
by: Akiva06/14/2020
Works just as expected.
by: Andrea 06/01/2020
Great product, no assembly required! Super safe and quick
by: Russ R.07/04/2014
Great Product! Arrived quicker than exp ected.
by: Bernie03/27/2019
fits well heavy duty and well made
by: Michael H.06/08/2017
Extremely happy with product and servic e!
by: Holcomb08/22/2021
Good American hitch…….made in America
by: Juan carlos10/31/2017
Product is strong and rugged. Easy to put together and install.
by: John 08/13/2022
by: Jared 06/20/2021
by: Carlos 04/02/2021
25
66
Show More Reviews
See what our Experts say about this Andersen Trailer Hitch Ball Mount
- Distance From Center Of Pin Hole To Backside Of Upright On Rapid Hitch Ball Mount Kit AM3400In regards to the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit part # AM3400, the distance from the center of the hitch pin hole (closest to end of shank) to the backside of the vertical upright is 4-3/8" which is actually shown in the attached video.
view full answer... - Weight of Rapid Hitch Adjustable Ball Mount Kit # AM3400The Rapid Hitch Adjustable Locking Ball Mount # AM3400 has a total weight (with the hitch ball attachment) of just about 19 pounds. The shank by itself without the hitch balls is only 6 pounds. I have attached a short video review on this product that you can check out as well.
view full answer... - Adjustable Ball Mount Recommendation with Less than 4 inches of Drop and 2 Ball SizesSounds like you'd really like the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls # AM3400. This can do a drop of up to 3-1/2 inches and has the two hitch ball sizes you want. All you'd have to do is flip the platform over. It also somes with locks too! I attached a review video for this for you to check out as well.
view full answer... - Replacement Pin For Rapid Hitch Ball Mount that Holds Ball Assembly to PlatformFor your Rapid Hitch part # AM3400 it sounds like you are looking for a replacement internal pin which we have with the part # AM3440. This is the pin that holds the ball assembly to the ball mount platform.
view full answer... - Locking Hitch Pin Replacement for Rapid Hitch # AM3200It appears you are asking about the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop # AM3400. If you are asking about just the lock for this, you will want the InfiniteRule Lock Set for Andersen Rapid Hitch Adjustable Ball Mounts - Stainless Steel - Qty 2 # 34061405-D.
view full answer... - Recommended Anti-Rattle Device for Rapid Hitch Adjustable, Locking, Aluminum Ball Mount KitThe Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls # AM3400 comes with locking hitch pins but it doesn't have an anti-rattle feature. For that you'll need to add something like the etrailer Anti-Rattle Hitch Stabilizer # e99007 which clamps around the shank of the ball mount and holds it tight against the hitch receiver.
view full answer... - Aluminum Adjustable Trailer Hitch Ball Mount For a 2-1/2" Receiver I do have an option for you as we currently only carry the 2" Shank # AM3422 and not the 2-1/2" shank 3422-25 for the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit # AM3400. The Fastway Self-Locking, Adjustable 2-Ball Mount # DTALBM6825 has an aluminum shank and fits into a 2-1/2" receiver. It uses an integrated hitch lock so no receiver hitch pin is required. The same key is used to secure the adjustable ball mount to the 8" drop shank.
view full answer... - Replacement Rubber Tops for Rapid Hitch Double HitchYes, we have the replacement nylon covers for the Rapid Hitch with the part # AM3664-2516 for the 2-5/16 inch ball and part # AM3664-2 for the 2 inch balls.
view full answer... - Three Ball Ball Mount # C45001 Recommended for 9000 lb Boat and 7500 lb Travel TrailerThe triple ball ball mount with the highest capacity we offer is the Curt # C45001. The 1-7/8 inch ball has a 5000 lb capacity, the 2 inch ball can handle 7500 lbs and the 2-5/16 inch ball is rated for 10,000 lbs. Another option you have is a Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit, part # AM3400. I am sorry, we do not offer a ball mount manufacturer by the name of Kearns, and I could not find one from the research I conducted.
view full answer... - Adjustable Aluminum Ball Mount for a 2017 Chevrolet Silverado 2500 with 2-1/2 Inch Receiver TubeWe have a number of adjustable ball mounts that will fit the 2-1/2" receiver tube opening on your 2017 Chevrolet Silverado 2500 which I have attached for you. However, the Rapid Hitch Adjustable Aluminum Ball Mount Kit part # AM3400 or part # AM3405 are designed to fit a 2" receiver tube opening therefore will not work for you. The difference between them is that part # AM3405 has a nylon cap which will not require lubrication. They both have zinc plated hitch balls. Instead, I recommend...
view full answer... - Do Class Iv and Class V Hitches Have Different Sized Receiver Openings The B&W Tow & Stow Adjustable Ball Mounts will either fit a 2 inch receiver, # BWTS20048B, or a 2-1/2 inch receiver opening, like # BWTS20049B. None will fit both a 2 inch and a 2-1/2 inch receiver hitch opening. Normally. Class IV trailer hitches, like # C14006 for 2014-2017 Chevy/GMC 1500 Trucks, will have 2x2 inch receiver openings. Class V hitches, like # C15300 , will use a 2-1/2 inch receiver opening. However, there are some Class V that use a 2x2 inch opening. I have linked a...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Kathleen M
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Austin
11/27/2022
Have used this hitch around 100 times this year. I still have no complaints. It still looks good and it continues to be easy to adjust. The locks are great. My only downside a year ago was the price. That is the same after a full year of use.