Sealed, Mini Rectangular LED Trailer Clearance, Side Marker Light, 3 Diode - Red

Optronics Trailer Lights - AL91RB

2-1/2" L x 1-3/16" W x 7/8" D; PC-rated; sealed, waterproof; 2-prong plug connection; 3 LEDs

Sealed, Rectangular LED Trailer Clearance and Side Marker Mini-Light, 3-Diode - Red

This thin-line, sealed, rectangular LED mini-light can be used as a clearance or side marker light. This PC-rated light functions as both a marker and clearance light when mounted properly at a 45 degree angle. This red light measures 2-1/2" long x 1-3/16" wide x 7/8" deep. Lens and housing are one unit that is sonically sealed and waterproof, providing protection to the three light-emitting diodes. The light draws 0.051 amps at 12.8 volts. A separate, industry standard, two-prong plug is used for the wiring connection, making it simple to upgrade from incandescent lights. Choose from many mounting and wiring options, required to complete the installation.

• Red, rectangular light functions as clearance, side marker light
• PC-rated light - functions as both a clearance and side marker when mounted at a 45 degree angle
• Sealed, waterproof housing and lens unit
• 3 LEDs (Light Emitting Diode)
• Accepts industry standard, 2-prong plug
  • Simple to upgrade from incandescent lights
• Many mounting and wiring options
• Dimensions: 2-1/2" L x 1-3/16" W x 7/8" D
• Light draws 0.051 amps at 12.8 volts

Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # LED1225-3R
Truck Lite # 15250R
Grote # 47082
Peterson # M153R
Maxxima # M20320R

Manufacturer Specifications

LED clearance and side marker light. PC-rated light that functions as both clearance and side marker light when properly mounted on a 45 degree angle. Features sonically sealed, waterproof lens and housing in a single unit. Accepts industry standard, 2-prong plug for easy retrofit of incandescent lights. Multiple mounting and wiring options available.

AL-91RB Mini Thin Line Sealed LED Marker and Clearance Light - Red - 3 Diode 0.051A/12.8V by Optronics, Inc.

Video of Sealed, Mini Rectangular LED Trailer Clearance, Side Marker Light, 3 Diode - Red

Customers Who Purchased This Trailer Lights Also Bought...

Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Lights?

• Should LED Trailer Lights be Mixed with Incandescent Trailer Lights
  
• One main difference between LED lights and incandescents is the amount of power each one draws. I did a little research and found that if you were to have LEDs and incandescents on the same circuit, it would be too much power draw for the LEDs without using the proper resistors to compensate for the differences. It would be best to replace all the lights to one type or the other. However, if one of your stop/turn lights was LED and the other was not, that should be fine (provided both were de
  view full answer...


• Are Mounting Brackets Needed To Install Optronics LED Trailer Clearance Lights # AL91RB
  
• For installation of the Optronics LED Trailer Clearance Lights, part # AL91RB, you will need to use an Optronics Mounting Bracket. You can use either the Optronics Black Mounting Bracket, part # A91BB, or the Chrome Mounting Bracket, part # A91CB. The brackets are sold individually, so you will just need to order the same quantity as the number of lights you have. I have linked a video that show the installation of the Optronics AL91 Series Lights.
  view full answer...


• Will Optronics Side Marker Light # AL91RB Mount in Existing Rubber Grommets on Trailrite Trailer
  
• The Optronics Clearance/Side Marker Light, part # AL91RB, will mount in the rubber grommets that your Grote 4641 lights are installed in. I looked it up in the industry cross reference for lighting and it listed the # AL91RB light as fitting in your grommets. The rubber grommet we offer for the # AL91RB light is the Optronics Flush Mount Grommet, part # A91GB. This is a rubber grommet that is used when mounting the light flush to the trailer. It measures 3-5/16 inches long x 1-15/16 inches wi
  view full answer...