2" Round Grommet - Flush Mount - Open Back

Optronics Accessories and Parts - A54GB

Rubber PVC; shock mount protection; flush mount w/2-5/16" mounting hole; open back for wiring

A round, black PVC grommet needed for flush mounting 2" round sealed lights. The grommet has an open back for easy access with the wiring and needs a 2-5/16" mounting hole for installation. This rubber grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a two-wire pigtail is required to complete the installation.

Features:

• Rubber grommet for flush mounting 2" round lights
• Open back for easy wiring access
• Shock protection extends lamp life
• Requires a 2-5/16" mounting hole

Manufacturer Cross Reference
Grommet will work as an exact replacement for:
Uni Bond # GR2000
Wesbar # 223088
Truck Lite # 30700
Grote # 92120
Peterson # 146-18
Bargman # 40-30-020

Manufacturer Specifications

Black PVC grommet allows 2" diameter sealed lights to be flush mounted. Provides shock mount to lengthen lamp life. Requires parts A46PB or A49PB for electrical connection. 2-5/16" mounting hole required.

A-54GB 2" Open Back Flush Mount Rubber Grommet by Optronics, Inc.

Video of 2" Round Grommet - Flush Mount - Open Back

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Optronics Sealed Beehive Trailer Clearance and Side Marker Light Review

Customers compare A54GB to these similar products

Plug - Two Wire Pigtail for Sealed Trailer Clearance, Side Marker Lights - 6" Long$0.99

Rubber Grommet for 6-1/2" Oval Trailer Tail Lights$0.95

Right Angle 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights$1.15

Straight 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights$0.95

2-1/2" Round Grommet - Flush Mount - Open Back$0.85

Customers who look at this part also view

Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Red$1.95

Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Amber$1.95

Sealed, Uni-Lite Mini LED Side Marker and Clearance Light w Grommet, 2 wire, 2 Diode - Amber$5.50

Sealed, Miro-Flex, 2" Round, LED Trailer Side Marker, Clearance or ID Light, 9 Diode - Red$12.95

LED Trailer Clearance/Side Marker Light - 4 Diode, 12 Volts - Sealed - 2" Round - Red$8.50

Customers Who Purchased This Accessories and Parts Also Bought...

Plug - Two Wire Pigtail for Sealed Trailer Clearance, Side Marker Lights - 6" Long $0.99

Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Red $1.95

Rubber Grommet for 6-1/2" Oval Trailer Tail Lights $0.95

Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Amber $1.95

Bonded 4 Wire - per foot $0.57

Ask the Experts about this Optronics Accessories and Parts
Do you have a question about this Accessories and Parts?

• What is the Best Way to Remove a Light From Optronics Rubber Grommet # A54GB
  
• When removing a light a lot depends on the space you have. If space is not an issue you can remove both the grommet and light together by pushing out from the back of the hole since the grommet would have gone in the other way originally. The light can also be pushed through the grommet from the back. Using some soapy water should help. If the connection between light and trailer is particularly tight you might not have a choice but to take both out at the same time. You would need to be caut
  view full answer...