See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Bike Racks > Hanging Rack > 4 Bikes > Fits 1-1/4 Inch Hitch, Fits 2 Inch Hitch, Fits 1-1/4 and 2 Inch Hitch > Frame Mount - Standard > Class 2, Class 3 > Tilting Rack > Single Arm > Bike Lock > SportRack

A30704FBHitch Bike Racks A30704FBHitch Bike Racks A30704FBHitch Bike Racks A30704FBHitch Bike Racks A30704FBHitch Bike Racks A30704FB

SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2"

SportRack Hitch Bike Racks

Rating: ratingratingratingratingrating
2 reviews


Code:   A30704FB

Retail:$307.79

Price:$214.95

Shipping Weight: 42 pounds

Shipping Special
Quantity: 




SportRack Hitch Bike Racks - A30704FB

Carry four bikes with this versatile bike rack. Includes padded cradles and locking knobs. Also, this rack tilts down for easy access to any cargo area and collapses for storage or when not in use.

SportRack Tilting Trailer Hitch Mounted 4 Bike Carrier


Features:

  • Carries up to 4 Bikes
    • Accepts bikes with frames up to 2-1/4" in diameter
    • Cradles have height adjustment slots to carry bikes with larger diameter frames
    • Works with most alternative and larger tube frame bikes
  • Large padded cradles individually rotate to accept women's frames bikes
  • Powder coated to resist corrosion
  • Bike rack tilts down allowing access to the rear of the vehicle
  • Top support arm also collapses for travel without bikes or for storage
  • Bike rack includes a locking knob to secure the bikes to the rack

Specs:

  • Fits 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches
  • Shank measures 6-1/2" or 4-1/2" from the center of the hitch pin hole to the upright bar of the rack
  • Weight capacity: 180 lbs.
    • Maximum single bike weight is 45 lbs.
  • Accepts bikes with frames up to 2-1/4" in diameter
  • Cradle measures 6" wide
  • Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
    • Use A30901LHP hitch lock.

Bike rack cradles

Putting the locking cradle on the end will secure all the bikes behind it.

Adjustable shank

Shank can adjust from 1 1/4" x 1 1/4" to 2" x 2".

Folds for easy storage

Bike rack folds up for easy storage.

Valley # 91331



Video of SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of sportrack single arm bike rack A30704FB
SportRack Single Arm Hitch and Drive Deluxe Hitch Bike Rack Review

Video Transcript for SportRack Single Arm Hitch and Drive Deluxe Hitch Bike Rack Review

Today we are going to show you part number A30704FB from Sportrack and this is their Hitch and Drive Deluxe model. This is a bicycle rack that can work for 1-1/4 and 2-inch hitch receivers and it carries four bikes. First we are going to show you a couple of features of this bicycle rack. First off you can see it is in stored position. What you can do is pull this pin out and then flip it over and it is ready for service. If you want to use this 1-1/4 inch receiver hitch, all you have to do is just take off this bushing. This just presses on, so you just need a simple screwdriver and you just pry it right off. And then you can go ahead and use a 1-1/4 inch receiver from there.

We will go ahead and install this onto a typical two-inch receiver hitch. Now the bicycle rack installs via this bolt right here. It actually threads into the bicycle rack and bolts it to the hitch, so it definitely will not go anywhere. On the other side of the hitch bolt, there is a safety pin that goes on there. Next we can go ahead and show you the tilt option of this bicycle rack. It is pretty nice. You pull out the pin here and you can move it backward until it hits the stop. This feature allows you easy access to your tailgate or the back of your SUV. Next we will go ahead and install a bicycle and show you how it gets attached to the bicycle rack.

Put the bike onto the rack. This lid is adjustable up and down depending on the size frame you have. Now back on to the threads and spin it back down. What is also nice about this bicycle rack is that in the unit it comes with this locking knob. Basically what it does is you can tie down the last bike on the rack, and that way you cannot take off any other bikes behind it. And also, if you are only carrying one bike, you do not have to put it on the end, either. You could put it on one of the middle ones like we have here and then you could transfer the locking knob to that one, too, and it will work just the same. So you can transfer the locking knob to any one you want, especially if you are just doing one bike for the day. Tighten it up. And when you lock it, then you can spin the knob and it will not unthread. So that is locked. And again, what is nice about the cradles, also, is they have this rubber lining on both halves and also have the groove in the rubber lining where your cables run along, too. Again, the caps are also adjustable too, depending on the bike frame you have, from a really small frame up to a rather large frame. And there you have it for part number A30704FB from Sportrack, their Hitch and Drive Deluxe model.






Customers Who Purchased This Hitch Bike Racks Also Bought...



Replacement parts available for this product






Customer Reviews  -  Write a review about this product

SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4 - A30704FB

Average Customer Rating:  ratingratingratingratingrating3.0 out of 5 stars   (2 Customer Reviews)




SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4 - A30704FB

ratingratingratingratingrating by: chris c07/06/2011

Is this review helpful?


the good: it's sturdy, and adjustable- you can choose where along the arm the bike holders go, and the angle. the bad: the hardware that the clamps screw into (the ones you use every time you put a bike on) are not stainless steel, or even coated. they will rust, and rust quickly. to me this is unacceptable- it's impractical to be removing the hitch every time you use it, and if you're spending a few hundred dollars on something that's going to be in the elements, rust should be taken into account. at least chrome plate the things. it also shakes around a lot in a 1-1/4" hitch. this may be normal, so i'm not sure if it should be considered a negative. it doesn't affect the sturdiness at all, but it is weird when the whole thing is shaking around; it doesn't inspire confidence.18529



SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4 - A30704FB

ratingratingratingratingrating by: Kilbert06/15/2011

Is this review helpful?


Item is exactly what is on the picture, great product, very heavy, very sturdy. Service from etrailer.com is awesome! Received the item super fast! Thnx!17041




Ask the Experts about this SportRack Hitch Bike Racks
Expert Answers about SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2" - A30704FB                                          Do you have a question about this Hitch Bike Racks?


  • Ease of Removing Bike Rack # A30704FB and Are There Locks Available
  • We have locks available that replace the pin used to attach the rack to the hitch. They slide or screw in like the pin, but instead of having a keeper clip, they lock into place with a key. For the bike rack you asked about, # A30704FB, and a 2 inch hitch you would use part # A30901LHP. To answer your question about removing a rack, it is very easy. You simply remove the pin holding the rack into the hitch, and the rack slips out of the hitch. The rack weighs just about 40 pounds so it is not
    view full answer...

  • Availability of Replacement Brackets for SportRack 4 Bike Hitch Mounted Folding Rack
  • We do have replacement parts for the SportRack 4 Bike Hitch Mounted Folding Rack w Frame Mount Cradles, item # A30704FB. The SportRack Hitch Mounted Bike Rack Replacement Top and Bottom Plate Assembly, item # 05-0031-000, is not available as a top half only, though. The SportRack A3070x Hitch Mounted Bike Rack Replacement Knob, item # SR05003300000, is also available for your bike rack.
    view full answer...

  • What are the Pros and Cons of the Single Tube Style SportRack 4 Bike Rack A30704FB
  • You are right, the single tube does smaller frame bikes, and is adjustable to hold frames up to 2-1/4 inches. In some cases this would not be the best choice, such as for larger frame mountain bikes. The part most people like best about this style, however is that the single arm makes it much easier to fit childrens bikes on the rack, since the shorter frame does not have to clear both arms to be attached on the rack. One of the best things is that the cradles can be rotated on the si
    view full answer...

  • Availabiltiy of Replacement 2 Inch Trailer Hitch Adapter for SportRack 4 Bike Rack # A30704FB
  • We do carry the part you need to adapt the 1-1/4 inch shank on the SportRack 4 Bike Hitch Mounted Folding Rack, # A30704FB, to work with 2 inch trailer hitches. You will need Replacement 2 Inch Sleeve for Sportrack Bike Racks, # 05001300000. I have also included a video demonstration of the bike rack for reference.
    view full answer...

  • Does the Arm Fold Down On the SportRack Single Arm Bike Rack # A30704FB Need to Fit in Garage
  • The arm on the SportRack Single Arm Bike Rack, # A30704FB, folds back towards the vehicle. Because of this design, and because the arm is longer than the distance from the center of the hitch pin hole to the back of the upright bar it pivots on, you would not be able to fold the arm back and down, see video review link, with the bike rack installed in the hitch on the vehicle. If you have to remove the hitch to fold the arm, you might as well store it in the garage at that point. The folding des
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com