40 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket

Pollak Accessories and Parts - 9510

Features:

• Metal housing with perpendicular mounting bracket
  • 2-Piece design
  • Attached by spot welding
• Cycling automatic reset
  • Cycles continuously during over-current condition
  • Returns to run mode when source of over-current is removed
• (2) 10-32 Studs
  • Yellow, dichromate (copper color) plating on battery terminal
  • Zinc plating (silver color) on auxiliary terminal
• Straight mounting bracket
• SAE Standard J553 compliant

Specs:

• Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls
• Terminal dimensions: 0.66" long
• Current rating: 40 DC amp
• Voltage rating: 12 VDC (Voltage Direct Current)
• Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C)
• Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C)
• 1-Year limited warranty

54-240 Pollak Single-Way, Thermal Circuit Breaker - Cycling/Automatic Reset - 90-Degree Mounting Bracket - 40 Amp

Customers Who Purchased This Accessories and Parts Also Bought...

Ask the Experts about this Pollak Accessories and Parts
Do you have a question about this Accessories and Parts?

• Where to Get Power Supply for the Auxiliary Connector
  
• To wire a 12V lead to your trailer connector, you will want to run the wire to the battery, via a 40 amp circuit breaker like part # 9510.
  view full answer...


• Brake Controller Wiring on a 2006 Nissan Pathfinder
  
• The blue wire coming from the 7 way at the rear would connect to the blue output wire coming from the brake controller. Typically this wire would run from the port under the dash to a location somewhere near the rear of the vehicle. Check the driver's side frame rail or behind the bumper for a blue wire that is not connected to anything. The black wire is for your 12V lead, and would run to a 12V power source via a 40 amp inline circuit breaker like part # 9510. The orange lead is either used fo
  view full answer...


• Wiring a 7 Pin Connector on a 2004 Jeep Wrangler
  
• You will connect the power lead to your positive battery terminal with a 40-amp circuit breaker.
  view full answer...


• How to Wire Quick Electrical Disconnect Kit for a 2,000 Lb Trailer Winch on a 2007 Ford F-150
  
• Yes, we have a Trailer Winch Wiring Kit, item # SW1520, that will work for your 2,000 pound winch on your boat trailer. I have linked installation instructions for you to review. For a circuit breaker to protect your battery and the winch from overload, the Circuit Breaker for Superwinch Electric Winches, item # 90-22860, would be the correct choice for winches up to 3,000 pounds. This circuit breaker is a bank of three 50 amp circuit breakers connected in parallel. We have an informationa
  view full answer...