See What Fits Your Vehicle
customer service | view cart  View Cart

Accessories and Parts > Hitch Bike Racks > Accessories > Storage > Bike Rack Storage > Wall Mounted > Thule, Yakima > 2 Accessory Capacity > Boone Outdoor

Boone Hang2 - Wall Mounted Bike Rack Storage - Older 2" Thule and Yakima Bike Racks

Boone Outdoor Accessories and Parts

Rating: ratingratingratingratingrating
2 reviews


Code:   90H2S

Retail:$24.95

Price:$19.95

Shipping Weight: 4 pounds

Shipping Special
Quantity: 




Boone Outdoor Accessories and Parts - 90H2S

For Thule and Yakima racks that only fit 2" hitches, the Hang2 securely stores bike racks, cargo carriers, or other hitch accessories out of the way when not in use.

Wall Mounted Storage for older Thule or Yakima Bike Racks - Hang2 by Boone Outdoor Hardware

Hang2 easily stores two hitch-mounted racks or accessories. This laid-back little guy hangs out anywhere you have wall space. When Sports Racks and Cargo Carriers are off your vehicle they are awkward, unwieldy and create a hazard on the garage floor. Securely store and organize bike racks, cargo carriers, tailgate tables, ski/snowboard racks, draw bars and other hitch gear. Don't make waves with a cluttered garage. Hang2 dude!

  • Maximize Limited Storage Space
  • Keep hitch gear easily accessible
  • Store bulky racks up out of your way
  • Quick side-loading design makes mounting the most cumbersome hitch mounted racks a snap
  • Designed for Thule and Yakima Bike Racks with 2" only shanks and a welded nut on one side of the inside of the shank
    • This 5/8" diameter pin is designed to support the 5/8" hole on one side of the carrier shank, and is narrow on the other side to accommodate the bulit-in anti-rattle device
    • Will not fit adjustable hitch-size bike racks (bike racks that fit both 1-1/4" and 2" hitch receiver openings)
  • Also fits Swagman bike carriers
  • Quickly mounts to any available wall space

902HS Wall Mounted Storage for Thule or Yakima Bike Rack with Bike Rack Shoulder Pin - Hang2 by Boone Outdoor Hardware





Video of Boone Hang2 - Wall Mounted Bike Rack Storage - Older 2" Thule and Yakima Bike Racks


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of boone hanging rack 912H2
Hang2 Hitch Accessory Storage Rack Review

Video Transcript for Hang2 Hitch Accessory Storage Rack Review

Today we are going to show you part number 912H2, the Hang2 by Boone Outdoor Hardware. What we have here is a wall mounted trailer hitch accessories storage rack. Basically this is a nice little deal that you can bolt to the inside of your garage wall, or any wall, for that matter. And you can use it to organize your bicycle rack, cargo carriers, the Boone tailgate tables, drawbars or other hitch gear. It maximizes a lot of storage in just a little bit of space. We will go ahead and add a couple of accessories onto it and show you how valuable this part is.

First off, we will start with a regular Class III receiver. Simply slide it on and then this pin holds it in place, and then this little safety pin will keep it from falling off. Now one accessory is out of the way and we will add our bicycle rack onto it. Slide it into place and and install your clip. The Hang2 does come stocked with two 5/8 hitch pins. If you do have a Thule or Yakima rack, you will need a different type of pin for that, and you would need to see part number 90H2S.

And there you have it for the Hang2 by Boone Outdoor Hardware, part number 912H2.


Customers compare 90H2S to these similar products








Customers Who Purchased This Accessories and Parts Also Bought...






Customer Reviews

Boone Hang2 - Wall Mounted Bike Rack Storage - Older 2 - 90H2S

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (2 Customer Reviews)




- 90H2S

ratingratingratingratingrating by: Guy R05/13/2013

Is this review helpful?


Works as advertised even for a heavy bike rack. The staff at etrailer.com was very helpful as I had some questions as to the model to purchase.80073

comment on this review


- 90H2S

ratingratingratingratingrating by: Anthony C.05/07/2013

Is this review helpful?


Excellent for my Thule rack. Easy install, I'm actually ordering a 2nd one. 79247

comment on this review


Ask the Experts about this Boone Outdoor Accessories and Parts


  • Is the Boone Hang2, # 90H2S, Compatible with the Swagman XTC4 Platform Bike Rack # S64665
  • I spoke with my contact at Swagman about the XTC4 Bike Rack, # S64665. The shank is not solid and the hitch pin hole is not threaded all the way through. It just has a weld nut on the one side and can only be threaded on one side. So it is compatible with the Boone Hang2, # 90H2S. As you have pointed out, one of the pins in this model Hang2 has a pin with a smaller diameter at one end. This is the part that will fit in the threaded portion of the XTC4 bike rack. The Boone Hang2 - Wall Mounted
    view full answer...


Info for this part was:


Written by:
Ty

Edited by:
Fran

Test fit by:
Rick

Video by:
Zack

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com