Brake Controller Installation - 2005 Dodge Durango - Video
Tekonsha Prodigy Electric Trailer Brake Controller with Dodge Adapter
Tekonsha introduces Prodigy, one of the most advanced and intelligent approaches to trailer brake controls. Prodigy, requiring no manual leveling, is a technological breakthrough among inertia-activated brake controls. Equipped with a self-adjusting sensing device similar to the one used in guided-missile technology to allow for easy, flexible installation - from nearly horizontal to nearly vertical - the Tekonsha Prodigy constantly adjusts itself to the position of the tow vehicle.
- Features:
- Applies power to the trailer brakes in proportion to vehicle's deceleration.
- No level adjustment necessary - it adjusts itself to varying terrain as you drive.
- Works proportionally in reverse - great for backing into tough spots.
- Digital display depicts voltage delivery to trailer during braking.
- Continual diagnostics check for proper connection, shorted magnet condition and much more.
- "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers.
- Power-saving mode reduces drain on battery when vehicle is not in use.
- Unique pocket mount allows for flexible mounting options.
- Quick and easy disconnect feature allows user to remove and store the control when not in use.
- Vehicle specific wiring adapter is included to make installation simple
- Rotary manual brake adjustment lever
- Limited lifetime warranty
- Specs:
- Dimensions: 3-1/8" Wide x 5-1/8" Long x 1-3/16" High
- Made for up to 4-axle trailer brake systems (2 to 8 Brakes)
- Can be mounted between 0 degrees (level) and 70 degrees
- Boost levels increase power up 0%, 13% and 25%
- Power saving sleep mode draws 3.6 milliamp
- Version 2.6
- Installation:
The vehicle specific adapter has one end that plugs into the back of the brake controller while the other end plugs into the port located under the dash.
Note: If your vehicle has a factory installed hitch and 7-way connector, then all of the wires for the brake controller have already been run. If not, additional parts will be required to complete the installation of the brake controller.
Tekonsha Prodigy Brake Controller 90185 with Adapter 3020P
Instructions
