Trailer Hub & Drum Assembly - 3,500 lbs. Axles - 5 on 4-3/4

Dexter Trailer Hubs and Drums - 845476UC3

• Used on Dexter and Most 3,500 lbs Axles
• Capacity of 1,750 lbs per each
• Drum Size: 10" x 2-1/4"
• Bolt Pattern: 5 on 4-3/4 (for information see below)
• Bearings, Races, Cap, and Seal Included (L68149 Inner / L44649 Outer Bearings)

Note: Most trailer tires that are smaller than 15" and have 5 bolts, have a 5 on 4-1/2" bolt pattern.

How to Measure Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number is the diameter of the circle the holes sit on. To determine the diameter on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the circle (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). When the number of bolt holes is odd, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from it on the circle (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).

AND / OR

The distance between the center of one bolt hole on the wheel to the center of the bolt hole right next to it will also help determine the bolt pattern.

• If D = 2-5/8" then the bolt pattern is a 5 on 4-1/2
• If D = 2-3/4" then the bolt pattern is a 5 on 4-3/4
• If D = 3" then the bolt pattern is a 5 on 5
• If D = 3-1/4" then the bolt pattern is a 5 on 5-1/2

Customers Who Purchased This Trailer Hubs and Drums Also Bought...

Replacement parts available for this product

Ask the Experts about this Dexter Trailer Hubs and Drums
Do you have a question about this Trailer Hubs and Drums?

• Replacement Hub and Drum and Brake Assemblies for a 1973 Miley Horse Trailer
  
• Outer Bearing # LM-12749, inner diameter 0.8656 inches, works with the Race # LM-12711 which has an outer diameter of 1.81 inches. You should measure the outer dimension of your race to be sure that the LM-12711 race is correct. There is a possibility that other race part numbers could also work with the LM-12749 bearing and have a slightly different outer diameter. The LM-12711 is the most commonly used race for this bearing though. I checked with our suppliers and at this time, we do not of
  view full answer...