Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs

Hidden Hitch Ball Mounts - 80412

Perfect for towing trailers of varying coupler heights. Adjustable to 12 different ball height positions. Shank can be used in the up or down position, as required for high or low ground clearance.

• Maximum rise: 8.375"
• Maximum drop: 9.625"
• Shank Dimensions: 2" x 2"
• Capacity: 6,000 lbs GTW and 600 lbs TW
• Conveniently adjusts using included 5/8" pins
• 12" From center of hitch pin hole to center of ball hole
• 7-1/2" from the center of hitch pin hole to the adjustable holes
• Ball platform thickness: 3/4"
• 1-1/2" From the center of 1 hole on the upright bar to the center of another hole
• 1" Diameter shank required for ball

Class III (2" x 2") ball mount accessories

Video of Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs

Customers Who Purchased This Ball Mounts Also Bought...

Ask the Experts about this Hidden Hitch Ball Mounts
Do you have a question about this Ball Mounts?

• Is the Drawbar Available Separately from the Hidden Hitch Adjustable Ball Mount # 80412
  
• The 1-1/2 inch spacing is unique to the Hidden Hitch Adjustable Ball Mount, item # 80412. The drawbar is sold only with the ball mount plate. There is a replacement ball mount plate, item # 80418, available to replace the one included with the # 80412 kit or to use for attaching a different size ball to.
  view full answer...


• What can I do to Reduce Sag on my 2007 Jeep Liberty by Towing my Trailer
  
• If your Jeep is sagging, an adjustable ball mount is probably not going to be the cure. The best thing would be to use a weight distribution system if you have a 2 inch hitch. I see that you have ordered the Curt Class III hitch, part # 13044, from us and I assume that is what you have on your 2007 Liberty. This hitch cannot be used with a weight distribution system. It has a 500 pound tongue weight and 5,000 pound gross towing weight capacities. Since Curt does not provide a weight distribut
  view full answer...


• What Amount are the Adjustments Increments in Hidden Hitch Adjustable Ball Mount, # 80412
  
• The Hidden Hitch Adjustable Ball Mount, # 80412, adjusts in 1-1/2 inch increments. So if the maximum drop is 9.625 inches, the closest to 7 inches you can get is either 8.125 inches drop or 6.625 inch drop. In the rise position, if the max rise is 8.375 inches, then the closest to 7 inches you will get is a 6.875 inch rise. I have included a link to a video review of this ball mount below. The Self-Locking Adjustable Aluminum Ball Mount, # DTALBM7000, has up to a 10 inch drop or 11 inch ri
  view full answer...


• Adjustable Ball Mount Recommendation for a Jeep Liberty with Rear Mounted Spare Tire
  
• For your Jeep Liberty, I think the best adjustable ball mount option is going to be the CURT Multi-Ball Adjustable Ball Mount, # D900. It has a length of 16 inches from the center of the hitch pin hole to the center of the ball hole. It also has a maximum rise of 5-3/4 inches and comes with a 1-7/8 inch ball, 2 inch ball, and 2-5/16 inch ball. Or, if you are looking for a fixed ball mount that is long and still has a rise to it, take a look at Hidden Hitch Ball Mount, # 80233. This ball mount
  view full answer...


• Comparing 6,000 Pound Hidden Hitch Adjustable Ball Mounts
  
• Length is the difference between adjustable ball mounts # 80412 and # 80414. The Hidden Hitch Adjustable Ball Mount, # 80412, measures 12 inches from the center of the hitch pin hole to the center of the ball hole. For # 80414, it measures 14 inches from the center of the hitch pin hole to the center of the ball hole. Both have an 8-3/8 inch rise or 9-5/8 inch drop. Each has a 600 pound tongue weight capacity and 6,000 pound gross trailer weight capacity. Both are for 2 inch trailer hitch r
  view full answer...


• Is the Adjustable Ball Mount 80412 Manufactured in the USA?
  
• The Hidden Hitch Adjustable Ball Mount, part 80412, is proudly manufactured in the United States.
  view full answer...


• Is the Ball Mount Plate that Comes with the Adjustable Ball Mount, # 80412, Sold Separately
  
• Yes. You can get the Replacement Ball Mount Plate, # 80418, without having to get the shank as well. This plate will fit the 2 inch wide shank and has hole spacing of 3 inches center to center, so the measurements are consistent with the shank that comes with 80412.
  view full answer...