Trailer Coupler, 2" Ball, A-Frame Tongue (5,000 lbs)

Atwood Trailer Coupler - 80071

Atwood A-Frame Trailer Coupler

• Ball Size - 2"
• 12-1/2" from center of ball to base of triangle
• 9-1/2" wide across the base of the triangle
• Sides of the triangle are 8-1/2"
• Latch width: 2"
• Threaded bolt holes are 3" apart from center to center
• Designed for 50 degree A-Frame Tongue
• Painted Finish
• 5,000 lb Capacity
• Made in the USA

Customers Who Purchased This Trailer Coupler Also Bought...

Ask the Experts about this Atwood Trailer Coupler
Do you have a question about this Trailer Coupler?

• Dimensions of Trailer Coupler 80071
  
• This trailer coupler, part # 80071, is 12-1/2 inches from center of ball to base of triangle and 9-1/2 inches wide across the base of the triangle. The sides of the triangle are 8-1/2 inches. The 3 threaded bolt holes are 3 inches apart from center to center. The latch width is 2 inches.
  view full answer...


• Trailer Ball is Loose in Coupler
  
• The very first think I would recommend you do immediately is confirm that you are using the correct trailer ball size for your coupler. The required ball size for the coupler should be stamped into the metal on the top of the coupler. If you were using a 1-7/8 trailer ball with a coupler designed for a 2 inch ball, it would explain why the ball is loose in the coupler. If this is the case, DO NOT tow the trailer until you can get the correct size trailer ball. Your ball should have the size stam
  view full answer...


• Latch Repair Kit for 2 Inch Atwood Yoke Style, A-Frame Trailer Couplers
  
• We do carry some replacement parts for Atwood Trailer Coupler, # 80071. Take a look at the Latch Repair Kit for 2 Inch Atwood Yoke Style Couplers, # CP02-010. this is the trailer coupler repair kit for Atwood yoke style couplers that use a 2 inch diameter ball. This should be all you need to repair your coupler.
  view full answer...


• Will Coupler Repair Kit Fix Latch Tab Malfunction on Atwood # 80071 A-Frame Coupler
  
• A repair kit for your trailer coupler should fix the problem with the latch tab malfunctioning. If you have the coupler you selected, Atwood Trailer Coupler, part # 80071, then you will need Latch Repair Kit for 2 Inch Atwood Yoke Style Couplers, part # CP02-010. I would recommend having a trailer professional inspect your coupler just to make sure that it is operating correctly and to verify that you only need a Latch Repair Kit just to be safe.
  view full answer...


• Availability of an A-Frame Coupler that will Fit a 1-7/8 Inch Hitch Ball
  
• The only A-Frame couplers that I have for a 1-7/8 inch ball are the two Titan brake actuator couplers. The Titan A-Frame Brake Actuator- Multi-Fit Ball - Weld On - 6,000 lbs, part # T2492800, and the Titan A-Frame, Leverlock Brake Actuator - Adjustable Ball - Weld On - 6,000 lbs, part # T4845500. These are couplers that include a hydraulic brake actuator and will work on drum brakes. The couplers that are available for a 1-7/8 inch size hitch ball are all for a straight tongue trailer. Th
  view full answer...


• Trailer Coupler Lock Recommendation When MasterLock and DeadBolt are Too Long
  
• If you want a bar and key style lock like the deadbolt, the smallest span that will still fit your coupler is 2 inches. So you will have 3/4 inches left over. Since you have already tried MasterLock and Deadbolt, maybe you would be interested in a different type of lock. I have included a link to our coupler lock main page for you to view. You might find something like the Gorilla Guard, # 63227, will give you a better fit.
  view full answer...