Trailer Hub Assembly - 5,200 & 6,000 lbs Axles - 6 on 5-1/2

Dexter Trailer Hubs and Drums - 8-213-5UC1

Trailer Hub, 6 bolt on 5-1/2" circle with bearings, races and seal

• Capacity of 3,000 lbs per each
• Bolt Pattern: 6 on 5-1/2 (for information see below)
• Bearings, Races, Cap, and Seal are Included
  • 25580 Inner / LM67048 Outer Bearings
  • 10-1 Grease Seal

How to Measure Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number is the diameter of the circle the holes sit on. To determine the diameter on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the circle (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). When the number of bolt holes is odd, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from it on the circle (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).

Customers Who Purchased This Trailer Hubs and Drums Also Bought...

Replacement parts available for this product

Ask the Experts about this Dexter Trailer Hubs and Drums
Do you have a question about this Trailer Hubs and Drums?

• Which Wheels Fit On Dexter Trailer Hub Assembly, # 8-213-5UC1
  
• When fitting wheels to a Dexter Trailer Hub Assembly, # 8-213-5UC1, you would need to measure the wheels you are trying to use. You would measure the bolt pattern, the center hole diameter, and the stud size. To measure the bolt circle on a 6 lug application you would measure from the center of one bolt hole to the center of the bolt hole directly across from it. So on the Dexter hub you referenced that measurement would have to be 5.5 inches. I have included a link to our FAQ article on meas
  view full answer...