Dexter Trailer Hubs and Drums - 8-201-5
- Used on Dexter 5,200 lbs and 6,000 lbs axles, or on spindles requiring a 2-1/8" or 2-1/4" I.D. Grease Seal
- Capacity: 2,600 lbs per each
- Drum Size: 12" x 2"
- Bolt Pattern: 6 on 5-1/2 (see information below)
- Bearings, cap and seal not included
- Bearings: 25580 inner / LM67048 outer
- Grease seal: 10-1 (single lip seal) or 10-10 (for double lip & e-z lube axles)
- Grease cap: RG04-080 (standard axles) or RG04-060 (E-Z lube axles)
How to Measure Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number is the diameter of the circle the holes sit on. To determine the diameter on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the circle (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). When the number of bolt holes is odd, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from it on the circle (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).
Customers Who Purchased This Trailer Hubs and Drums Also Bought...
Replacement parts available for this product
Ask the Experts about this Dexter Trailer Hubs and Drums
Do you have a question about this Trailer Hubs and Drums?
- Which Grease Caps fit Trailer Hub Part # 8-201-5
- For hub 8-201-5 you will need 2.44 inch OD drive in caps. We have several caps available for this size like part # RG04-060, which is a standard cap, or part # RG04-080, which have removable plugs for checking grease or bearings.
view full answer...
- Hub and Drum Assembly for 6000 lb Axle
- Given the information you have provided, the Trailer Hub and Drum, part # 8-201-5UC3 is what you are needing. This assumes that the brake assemblies you have are 12 inch. The bearings, cap, and seals are included with the Hub and drum.
We can set you up with the 15 inch wheels you are needing, # AM20532 is a white powder coated wheel, part # AM20534 is steel with a galvanized finish, and part # AM20516 is an aluminum wheel.
view full answer...
