- Used on Dexter 5,200 lbs. and 6,000 lbs. Axles, Or on Spindles requiring a 2-1/8" or 2-1/4" I.D. Grease Seal
- Capacity of 3,000 lbs. per each
- Drum Size: 12" x 2"
- Bolt Pattern: 6 on 5-1/2 (see information below)
- Bearings, Races, Cap, and Seal Not Included
- 25580 Inner / LM67048 Outer Bearings
- Use either 10-1 (single lip seal) or 10-10 (for e-z lube axles) grease seals
How to Measure Bolt Pattern
Determine the bolt pattern by the number of bolts and the bolt circle. To determine the bolt circle on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the diameter (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). On odd number bolt wheels, measure any bolt hole center to the point halfway between bolt holes on the diameter (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).
