Adjustable Wheel Net with E-Track Fittings (Each)

Erickson Trailer Cargo Control - 77314

Adjustable Tire Strap with E-Track Fittings

• Strong polyester webbing with limited stretch
• Mildew Resistant
• Cambuckle adjustment allows strap to fit small and large tires
• Universal - fits most tires up to 29" in diameter
• Capacity: 3,500 lbs
  • Safe Working Load: 1,166 lbs
• E-Track sold separately

08314 Erickson Manufacturing E-Track Adjustable Tire Strap

Customers Who Purchased This Trailer Cargo Control Also Bought...

Ask the Experts about this Erickson Trailer Cargo Control
Do you have a question about this Trailer Cargo Control?

• Tie Downs and E-Track Recommendation for Securing a BMW K1200, ATV, and Dirt Bike on a Trailer
  
• I would recommend using 2 sections of Horizontal E-Track, # E19148, down each side and 2 sections of Horizontal E-Track down the middle of your trailer, 6 sections in all, to give you as many tie down options as possible for securing all of your different toys. Your BMW K1200 sounds like the heaviest item you will need to tie down. I recommend using 2 packages of the Retractable Ratchet Straps, # 34414, along with 4 of the E-Track Tie-Off Rings, # 59131. Four tie down points are needed for i
  view full answer...


• Adjustable Wheel Net for a Can-Am 27x9x12 Tire
  
• The Adjustable Wheel Net, # 77314, is a universal fit item that is designed to fit most tires up to, but not exceeding, 29 inches in diameter. Your Can-Am tires are 27 inches in diameter so there is a very good chance the wheel net will fit. This wheel net is designed to be used with the E-Track Trailer Cargo Control System, # E19148. I have included a link to a video review of this system for you. If you do not have the E-Track system, we also have a wheel need for tires up to 29 inches i
  view full answer...


• Can E-Track Trailer Cargo Control be Mounted to an Aluminum Trailer
  
• The E-Track Trailer Cargo Control, # E19148, can be secured to a surface using screws, rivets, or welding. Since your surface is aluminum you would not weld it. Something like machine screws would work better. The E-Track does not come with hardware so you can use what will work best for your trailer by picking up some hardware at a local hardware store. I have included a link to a video review of the E-Track for you.
  view full answer...


• Height of Horizontal E-Track Part # E19148
  
• Routing out a channel in the trailer like you describe is a very slick method of attaching the e-track that works very well. The e-track is .430 or a bit less than 7/16 of an inch thick (see photo).
  view full answer...