See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Trailer Hitch


 75471   75471   75471   75471   75471   75471   75471   75471   75471   75471  

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Trailer Hitch

Rating: ratingratingratingratingrating
23 reviews


Code:   75471

Retail:$278.18

Price:$173.95

Shipping Weight: 60 pounds

Shipping Special
Quantity: 




Draw-Tite Trailer Hitch - 75471

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

  • Custom fit is designed specifically for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.




75471 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame



Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video hitch install 2009 hyundai santa fe
Trailer Hitch Installation - 2009 Hyundai Santa Fe
Video Hitch install 2009 Santa Fe
Trailer Hitch Installation - 2009 Hyundai Santa Fe
Video Hitch install 2008 Hyundai Santa Fe
Trailer Hitch Installation - 2008 Hyundai Santa Fe
Video Hitch Installation Hundai santa fe
Trailer Hitch Installation - 2007 Hyundai Santa Fe

Video Transcript for Trailer Hitch Installation - 2009 Hyundai Santa Fe

Today on this 2009 Hyundai Santa Fe we are going to install part number 75471, from Draw-Tite. And this will also apply to part number 87414 from Hidden Hitch. I will go ahead and show you where the hitch mounts up on the vehicle. This is actually relatively easy, although you want to have an extra set of hands when you put it up there. It is going to install in these two holes at the end of the frame right here. This is a new vehicle, so the threads are relatively clean. However, if you have an older vehicle, what you want to do is go ahead and clean out those threads just to make sure. This is going to be identical on both sides of the vehicle. We do not even have to take down the exhaust either. 0:31

Alright, we have the threads cleaned out. We can go ahead and put the hitch up in position. And again, it is a good idea to have an extra set of hands to help hold it up. Alright, we have our bolts started. You have a little bit of movement left and right. Move it to the center as best as possible. And then go ahead and just snug up the bolts. Now that we have our bolts snugged down, we can go ahead and torque the bolts down as specified in the instructions. And with those few steps our hitch is already installed. And there you have it for part number 75471 from Draw-Tite.


This Product Fits The Following Vehicles

2007 - 2009 Hyundai Santa Fe




Customers Who Purchased This Trailer Hitch Also Bought...






Customer Reviews  -  Write a review about this product

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (23 Customer Reviews)




Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Jack F.01/08/2012

Is this review helpful?


Great service. Prouct arrived in 2 days. Videos were invaluable. Really made project easy. Only problem was getting bolts through corroded threads. We WD40 the holes and scrubbed with battery wire brush and still hard to torque by hand. Fortunately had access to Pneumatic gun which acceived success. Could not have done it without it. Wireing was a breaze!!29285



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Bob D.11/10/2011

Is this review helpful?


Customer servive was beyond belief, instructions were right on the money and everything fit perfectly. Even got a free quick ship. I wish everyone did business this way!!! Thanks Folks 26805



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Greg Shears09/23/2011

Is this review helpful?


Great trailer hitch. Fit perfect took less then a hour to install the hitch & wiring.24446



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: j w c08/24/2011

Is this review helpful?


Installed in minutes, it was a great deal, thanks22707



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Julie G.08/11/2011

Is this review helpful?


Hitch went on fairly easily thanks to your online video. Thanks for a great product and wonderful customer service.21597



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: muili06/12/2011

Is this review helpful?


Very good demo...on trailer wiring and all things from trailer hitch to wiring fit perfectly.better yet, the service was excellent. I will order from trailer again.16773



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: D. Talbert06/09/2011

Is this review helpful?


I am very happy with my order. Installation took longer than it should have, because my 8 year-old son was "helping", but it was still a breeze. I would suggest a wobble-tip extension for your ratchet, since the mufflers get in the way a bit. With a floor jack to hold the load, it is a simple one person install. Wire harness installed even easier, and the install video really helps to clarify, since the written instructions were a bit confusing.16608



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Justin U05/24/2011

Is this review helpful?


Everything went great. I received the product yesterday and had it installed by the end of the day. Thank you 15244



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Andrew05/01/2011

Is this review helpful?


Great product and very happy with etrailer.com. Shipping of the hitch perfect. The installation video helped a lot, especially the cleaning of the vehicles mounting holes - very important if you want the installation to go smoothly. Total install time from prep cleaning to bolting was about 1hr simple. My neighbor liked it so much he is looking in to a hitch for his truck.!12645



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Roy F03/18/2011

Is this review helpful?


Arrived on time - no problems, easy to install. Installation took about an hour instead of the estimated 30 minutes, but that is mostly because I wasn't sure what I was doing and went a bit slow. The video for installing the wiring harness was very helpful - I would have even been slower without that. 9737



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Chris S.02/11/2011

Is this review helpful?


This trailer hitch receiver was easier to install then I thought. While it is stated in the instructions that two people are usually necessary to install it, I was able to get it installed alone. Great product and excellent delivery times. 7018



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Dick M01/25/2011

Is this review helpful?


I just received my Draw-Tite hitch and it looks great. I can't wait to install it to bad it's below zero out today. The delivery was real fast. Thanks again Dick 6093



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Rick L.01/20/2011

Is this review helpful?


Fine hitch arrived very quickly! 5770



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Marilyn01/03/2011

Is this review helpful?


Hitch installed My husband can't do this type of auto work any more, so I installed the hitch. We used a lift table to hold the hitch up while I did the installation. The one thing your video needs to state is to pull the mufflers over a little (about one inch). That gives just the amount of room for your hand to fit up there to start the bolts. The wrench was about the same. Frank pulled the pipes over just a bit and it went very well. I used large wire ties to hold the wire harness up, along with the sticky tape. We tested everything and all works perfect! Now to buy the trailer! We will recommend this, and your company to everyone! It took me just about one hour to do the job...I was a bit nervous because I wanted to do a good job, and make sure those bolts were tight.4929



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Juan10/02/2010

Is this review helpful?


Hyundai Santa Fe install It cannot be any easier... I did it in the front of my garage, using my regular car jack, alone... two people will get it done in less than 15 minutes. Tools : 5/8 small socket, ratchet, 6 inch extension and a flex elbow ... bam .. bam...3495



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Bob F12/22/2009

Is this review helpful?


2009 Hyundai Santa Fe Limited Excellent fit, quick and easy bolt-up install. Does not interfere with the spare tire. Only the receiver opening and connector mount are visible. 2604



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Bruce E.07/01/2009

Is this review helpful?


As advertised; Does the job Hitch fit perfectly, and works as expecfted. No complaints there. etrailer shipped it fast. My only 2 complaints are cost: this is my 3rd hitch I have purchased in the past 6 years (on diff. vehicles), and while the price is a couple bucks cheaper than anywhere else, it's $50 more than my '02 Santa Fe I bought for a few years ago. Secondly, install was a little tight for a big guy with big hands!! You can crawl under without jacking up the back end, but it's very tight. And the space between the mufflers and the side of the hitch frame is tight for larger hands. My suggestion for a very quick install: back the rear end up on ramps, and use a 5/8" short socket with a long extension. This will cut a 15 minute install to 5 minute. Once you have some room, it's very simple and quick. Beyond that, I'm not thrilled with the design of any of the aftermarket hitches, as they wrap below the muffler on both sides. This is very visable from behind, and not very visually appealing. Would be better if the hitch wrapped above the muffler, completely out of sight.2080



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: DL05/15/2009

Is this review helpful?


Perfect fit. Easy install The part is well constructed and fit my Hyundai 2007 Sante Fe perfectly. It's well hidden and look great. The installation went just as shown in the video provided by etrailer.1850



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Jeff O04/17/2009

Is this review helpful?


Super fast install Hitch got to me door with free shipping in 4 days! You will two people to install. It took us literally 5 minutes to bolt it on. This hitch hides well.1753



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Jim S.03/23/2009

Is this review helpful?


Shipped fast.. Easy to install Delivered in 24 hours. Video to istall was very helpful. (as was bike rack video) Thanks.1674



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Steve05/09/2008

Is this review helpful?


The hitch installed easily! Fit my 07 Santa Fe like a glove. It looks better than a factory hitch. 839



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Eric B.03/25/2008

Is this review helpful?


Outstanding! Very easy bolt on design - two people to install may be easier, otherwise, use two car jacks to assist. Mount is completely hidden except for the Hitch. Towing capacity exceeds that of my trailer capacity. Have used with a rental trailer and works just great!698



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75471

ratingratingratingratingrating by: Don R01/07/2008

Is this review helpful?


very pleased with the product Have not tried the hitch yet , but the fit and easy install are excelent.555




Ask the Experts about this Draw-Tite Trailer Hitch
Expert Answers about Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75471                                             Do you have a question about this Trailer Hitch?


  • Installing The Draw-Tite Hitch # 75471 On A 2009 Hyundai Santa Fe
  • When installing the Draw-Tite Class III 2 Inch Hitch # 75471 on your 2009 Hyundai Santa Fe you will install the 3/16 inch blocks on all four bolts. I am including a link to the installation instructions on the Draw-Tite hitch and a video link to the Draw-Tite hitch being installed on a 2009 Hyundai Santa Fe.
    view full answer...

  • Does 2007 Hyundai Santa Fe Spare Tire have to be Removed to Install Draw-Tite Trailer Hitch # 75471
  • The spare tire on a 2007 Hyundai Santa Fe does not have to be removed to install or use the Draw-Tite Trailer Hitch, # 75471, provided that it is the factory spare and not a larger one that was added later. I have included a link to the installation instructions. You will see that installation of this hitch is a 2 step process. I have also included a link to a video showing a typical installation and it will be the same on your Santa Fe. You will see that put the hitch in place without moving
    view full answer...

  • Will a Draw-Tite Trailer Hitch Fit a 2008 Hyundai Santa Fe with Optional Third Row Seating
  • The Draw-Tite Trailer Hitch, # 75471, is listed as a fit for all models of the 2007 to 2009 Hyundai Santa Fe. I have included a link to the installation instructions for you and a link to a video showing a typical installation. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring there are 2 options. If the vehicle does NOT have a factory tow package, use # 11841
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com