Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
4 reviews
Code: 75421
Retail:$278.18
Price:$188.95
Shipping Weight: 37 pounds
Shipping Special
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This will also apply to Reese part # 44537 and Hidden Hitch part # 70761. The first step that needs to be taken is to pull the exhaust out of the way in this case we tied it off and pulled it to the side. You can also pull off the rubber exhaust hanger and get the same effect. This van has threaded holes already in the frame and well use three of them on each side. While youre here you might want to take a few minutes to clean out the threads to just to make sure everything will thread in okay. At this point we can start installing the hitch. What were going to do on the passenger side is slide the hitch over the exhaust to hold up that side while we put up the drivers side to keep things steady. We pulled our exhaust back out of the way and now well start our first bolt on the passengers
Now that we have the first two bolts holding the hitch in place now we can do the rest of them. The hitch has oblong slots to help you center it left to right. On some vehicles a body components may throw it off so you can center it with the frame or body components. In this case were going to center it with the frame. After you have centered the way you want it, snug down the bolts. The next step is to torque down the bolts according to their specified settings in the instructions. That completes the install of our hitch, part # 75421 from Draw-
2007 - 2009 Hyundai Entourage
2006 - 2012 Kia Sedona
2007 - 2010 Kia Sedona Long Wheel Base Models
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
by: TFM03/23/2011
Is this review helpful?
Perfect fit for the hitch and wiring harness. The online install videos were a great help.10162
by: Kenny K08/22/2011
Is this review helpful?
It was easy as described. Installation is slightly easier when using a lift for I did not have access to one so I used the Kia jack and stands for safty and it added about 5-10 minutes to the installation, still easy to do with 2 people.22527
by: Jon E07/08/2011
Is this review helpful?
As advertised, direct bolt on with no modification large scale part removals or unusual body contortions required. Everything arrived ahead of schedule and without damage.18930
by: Rob G.07/30/2008
Is this review helpful?
Easy add to your Entourage Took me about 20 min to install. Everything lined up nicely and the 6 bolts went in easily. I had to push the tailpipe out of the way to access the bolt holes on the passenger side. It probably would have been easier to use a strap as shown in the video.1113
Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
