See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Trailer Hitch


 75305   75305   75305   75305   75305   75305   75305   75305   75305   75305   75305  

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Trailer Hitch

Rating: ratingratingratingratingrating
23 reviews


Code:   75305

Retail:$318.45

Price:$199.95

Shipping Weight: 49 pounds

Shipping Special
Quantity: 




Draw-Tite Trailer Hitch - 75305

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

  • Custom fit is designed specifically for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 400 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.




75305 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame



Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video hitch install 2005 chrysler town and country
Trailer Hitch Installation - 2005 Chrysler Town and Country
Video Hitch install 2004 chrysler town and country
Trailer Hitch Installation - 2004 Chrysler Town and Country
Video hitch install 2006 dodge grand caravan2
Trailer Hitch Installation - 2006 Dodge Grand Caravan
Video hitch install 2005 dodge caravan
Trailer Hitch Installation - 2005 Dodge Grand Caravan

Video Transcript for Trailer Hitch Installation - 2005 Chrysler Town and Country

Today we are going to install part number 87719 from Hidden Hitch. On our 2005 Chrysler Town and Country. This also applies to part number from Draw Tite 75305. Our first step to install is to remove a few bolts. Starting with these 3 bolts in the shackle. You take out the 2 bolts on the outside and then finally the center bolt. Then behind here the first bolt behind it. We need to take this bolt out of there as well. All of this hardware will be reused. The next step is to go ahead and install the hitch. This is a good point to get a second pair of hands. You will have to wiggle it within the hitch itself then bring it back to the rear of the vehicle. We have the hitch hung by one bolt on each side to hold it up. Next we will snug that bolt down and watch the hitch wrap around that center bolt. Sometimes it helps to snug that bolt down and it pops around the center bolt.

Once you have that done you can get your outer bolt installed. After you get the hole lined up you can go ahead and install your other bolt. Once you get done moving the hitch around the way you want it just make sure this edge is sitting around the washer here. If you can feel the edge make sure it is the edge of the hitch is flush and sitting on top of the spring hanger. There should not be any sort of opening there what so ever. The next step is to these spacer plates that go in between the hitch and the frame. The factory bolt is going to be put back in. Sometimes this does not line up. It actually flexes pretty easy at this part. Once they are lined up and ready to go we can snug them up and do the same for both sides. Next we can get ready for the final torque. That takes care of our install of part number 87719 on a 2005 Chrysler Town and Country.


This Product Fits The Following Vehicles

2005 - 2006 Dodge Caravan with Stow-N-Go Seats

2005 - 2007 Dodge Grand Caravan with Stow-N-Go Seats

2005 - 2007 Chrysler Town and Country with Stow-N-Go seats




Customers Who Purchased This Trailer Hitch Also Bought...






Customer Reviews  -  Write a review about this product

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

Average Customer Rating:  ratingratingratingratingrating4.8 out of 5 stars   (23 Customer Reviews)




Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Karen B.01/30/2012

Is this review helpful?


Fast delivery. Easy install! AWESOME. Ready to GO! 30632



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Mike L.10/12/2011

Is this review helpful?


Very impressed with the service and product. My order was delivered in 3 days. Installation of the wiring harness took longer then the hitch. About and hour and a half from start to finish. 25454



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Brad10/03/2011

Is this review helpful?


Very easy to install. I don't know anything about cars and installed this. Really glad I didn't need to drill anything. Take 6 screws out and put the hitch in place with a friend and screw the 6 screws back in that easy. Watch the video its a no brainer.24994



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Mechancial Engineer MSP09/12/2011

Is this review helpful?


Hitch arrived in perfect condition. I ordered wiring harness from etrailer also. Videos from etrailer made installation a breeze. Hitch looks great. My dad has ordered several hitches from etrailer. He (and I) was (were) very impressed with how well the hitch fit to the existing chassis. Great Product.23838



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: phil b.09/06/2011

Is this review helpful?


great product fit like a glove bolted right on no problems23635



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Ben S.08/21/2011

Is this review helpful?


Very pleased with this hitch. Went on in about 30-40 minutes. The hardest part was getting the wiring harness in place on our minivan. But installing the hitch itself was a breeze! Would highly recommend.22391



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Bob S.08/14/2011

Is this review helpful?


Incredibly fast delivery! Hitch fit perfectly. Videos were a great help. Installation was painless. The only problem I had was that there were no existing bolts in the vehicle. I had to go out and buy new bolts. 21851



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Waneta P08/13/2011

Is this review helpful?


So far all I have done is install the hitch... well my brother did anyway. It took him about an hour and 45 minutes to get the hitch and wiring installed. The instructions explained the installation well, but you actually had to read them. Just skimming dod not work well in this case. 21813



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Nicholas M06/20/2011

Is this review helpful?


Shipping was free and delivery took only three days :) The hitch was very easy to install and appears to be good quality. My hope is that after a few years of use this rating can be moved up to Excellent!17285



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Brian W.05/31/2011

Is this review helpful?


The installation went off without a "hitch". It fit my 2006 Town & Country as advertised, and without any problems. I finished the job in about 45 minutes without help.15753



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Andy M.05/24/2011

Is this review helpful?


Product fit very well. Installation was easy except for one non-serious issue. I am a backyard mechanic and don't have a lift available or any assistants to help me. When I jacked my van up to install, I jacked it up on the rear axle with one jack at each wheel. This was not a good idea because I couldn't get the hitch at enough of an angle to slip it into place. To remedy I just jacked the vehicle by the jacking points. Therefore the wheels and axles and springs just hung down and presto, it was easy to position the hitch for installation.15279



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: ChipM05/18/2011

Is this review helpful?


Wiring harness was a challenge, no fault of the product, just the interior panels of the van proved to be difficult. Hitch and harness was at my door in 3 days. The hitch was a breeze, took longer to get the ramps and tools together than to put the hitch on. This is the 3rd time I purchased a hitch from etrailer. I tell all my friends to buy from here also. Keep up the good business etrailer !!!! 14691



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Andy H05/17/2011

Is this review helpful?


Haven't hing yet but install was a snap! Very solid product there were some scratches/chipped paint on hitch that is why 4 stars. Installed on 07 Town & Country alone with out raising the van. With help it's easily a 15 min job. Installed the hitch and T-one in an hour. Instruction videos are good. Next to tackle tranny cooler.14599



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Dallas B05/02/2011

Is this review helpful?


Hitch was of great quality. I love the videos to help with installation. Wiring harness was installed VERY easily by just plugging it in. The only issue I had was one bolt hole on the hitch was an 1/8 to 1/4 inch off and required a little creativity to get the bolt started. After the threads were started the impact drill did the rest. Service was amazing as always. I am a repeat customer and would gladly order again! Thanks12703



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Clar F.04/18/2011

Is this review helpful?


Fit well, easy install 11931



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Walter G02/09/2011

Is this review helpful?


Trailer Hitch fit the Caravan as advertised, looks really good. The installation instructions were clear and easy to follow. I can't wait to start towing my motorcycle trailer soon after I install the electrical wiring. 6922



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Mike02/16/2010

Is this review helpful?


I'm very happy I used etrailer FREE 2 day shipping.Great products and prices.Very helpful website.Nobody could have made this project any easier for me. Thanks etrailer!2725



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Justin04/05/2009

Is this review helpful?


Great Wonderful Product1708



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Art12/03/2008

Is this review helpful?


easy installation very clear directions, easy installation.1450



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: spue11/14/2008

Is this review helpful?


Super Easy Install This fit like a glove on '05 Town and country. Super snug fit, but all the holes lined up perfectly. Not a single skinned knuckle.1425



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Chris06/12/2008

Is this review helpful?


Easy to Install & looks great Easy to Install & looks great955



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Greg S.04/29/2008

Is this review helpful?


great experience Installation of hitch and wiring harness were incredibly easy. I am so glad that I didn't pay someone a higher price for the products and additional for the installation!!806



Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 - 75305

ratingratingratingratingrating by: Dan S.09/16/2007

Is this review helpful?


Great hitch. This was by far the easiest hitch I ever installed, and at a great price at etrailer.410




Ask the Experts about this Draw-Tite Trailer Hitch
Expert Answers about Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75305                                             Do you have a question about this Trailer Hitch?


  • Is Bumper Removed On Install Of Draw-Tite Trailer Hitch, # 75305, On 2007 Chrysler Town And Country
  • To install the Draw-Tite Trailer Hitch, # 75305, on your 2007 Chrysler Town and Country with Stow and Go it does not require the bumper to be removed. You would remove 3 bolts on each side of the vehicles frame. Before installing the hitch it is recommended to clean the corrosion from the weld nuts on the frame, that the bolts were attached to with a Battery Post and Terminal Cleaner, # DW00254. Then spray them with LubriMagic Green Series Biobased Spray Lubricant, # L10442 to help lubricate
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com