Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
5 reviews
Code: 75153
Retail:$289.85
Price:$210.95
Shipping Weight: 44 pounds
Shipping SpecialFully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on this 2007 Lexus RX350 we are going to be installing Hidden Hitch part number 70778. This installation will also apply for Draw-Tite hitch part number 75153. We are underneath the vehicle and we are taking a look at the driver side frame rail. We want to locate the mounting holes that we are going to be using to attach our hitch to the vehicle. The hitch is going to have three attaching points per side. We are going to be using the two weld nuts at the rear of the frame which currently is holding a tow hook in position. If you look a little bit further forward up on the frame rail you can see we have got two rubber plugs in the frame. We need to remove both of those so the hitch can sit flat against the frame rail. We are going to be using this forward weld nut as our third attaching point. 00:40
The first thing we need to do is remove the two bolts and lower the tow hook out of the way. The tow hook will not be reinstalled once the hitch is back up in position. That will be the same on the passenger side as well. With the tow hooks removed we can put the hitch up in position. Into each of the weld nuts we are going to be using the new 10 millimeter bolts along with the conical tooth washers. Now that we have got the hitch up into position and the fasteners into place we just want to go back through and torque them down. You want to verify with the directions the specific torque rating for each of the bolts. With our hitch installed we are going to give you a couple of dimensions that will help make choosing your hitch accessories easier. From the top of the receiver tube opening to the ground is going to measure 14-7/ 8 inches and from the center of the pin hole to clear the rear edge of the bumper is going to be approximately 1-1/ 2 inches. This will conclude the installation of Hidden Hitch part number 70778 on a 2007 Lexus RX350.
The first thing we need to do is remove the two bolts and lower the tow hook out of the way. The tow hook will not be reinstalled once the hitch is in position. With the tow hooks removed we can put the hitch up in position. Into each one of the weld nuts we are going to be using the new 10 millimeter bolts along with the conical tooth washer. Now that we have the hitch up in position and the fastneers into place, we just want to go back through and torque them down, You want to verify with the directions the specific torque rating for each individual bolt. 1:07
Now that we have our hitch installed we are going to give you a couple final installed measurements which will help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 14-1/2 inches. From the center of the pin hole to clear the rear edge of the bumper is approximately 3 inches. That will conclude the installation of Curt hitch part number 13530 on a 2007 Lexus RX350.
2004 - 2005 Toyota Highlander
2004 - 2006 Lexus RX 330
2007 - 2009 Lexus RX 350
2006 - 2007 Toyota Highlander All Models, except Hybrid
2006 - 2008 Lexus RX 400h Hybrid
2006 - 2007 Toyota Highlander Hybrid Models
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
by: Joe M04/19/2011
Is this review helpful?
20 minutes start to finish. the predrilled holes on the mount are elongated making alignment and installation of the bolts very easy. 11988
by: Quique07/25/2009
Is this review helpful?
Can't wait to tow stuff! I'm deducting one star only because it's pretty hard to persuade a hitch to bend. In the installation video, which was great by the way, the installer had to bend the hitch a little using a 2x4. I tried the 2x4, but the hitch had to move pretty far to get the back hole to line up. So my brother-in-law put his 2 ton jack on end and we cranked it open pushing against the spare tire and the hitch. Whew! Nevertheless, the installation was still very quick and I saved a lot of money by buying the hitch from Etrailer, installing it myself, and not going to my Toyota dealer.2169
by: Barry09/16/2007
Is this review helpful?
Easy installation, factory fit Hitch fit perfectly. Obviously custom-made for the Highlander. Only things I didn't like were some welding splatter and the paint was a bit thin in some places so it may need to be painted one day, but I would recommend it anyway. Great service and fast shipping407
by: Bob04/29/2007
Is this review helpful?
Easy installation High quality hitch, easy installation and a GREAT PRICE!!151
by: Russell in Dallas01/21/2012
Is this review helpful?
Product bolted right in place as it should. Fit and finish is excellent.30106
Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
