Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Rating: rating rating rating rating rating
8 reviews

Code: 75118

Retail:$267.62

Price:$181.95

Shipping Weight: 31 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Hitch Installation - 2004 Mazda Tribute - Video

Draw-Tite Trailer Hitch - 75118

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

Custom fit is designed specifically for your vehicle
Computer-aided, fully welded steel construction ensures strength and durability
Tested Tough - safety and reliability criteria exceed industry standards
Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
Lifetime technical support from the experts at etrailer.com
Black powder coat finish covers e-coat base for superior rust protection
Stylish, round-tube design
Ball mount, pin and clip sold separately
Made in USA

Specs:

Receiver opening: 2" x 2"
Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
  - Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
  - Maximum TW when used with weight distribution: 500 lbs
Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75118 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Trailer Hitch Installation - 2004 Mazda Tribute

Video Transcript for Trailer Hitch Installation - 2004 Mazda Tribute

Today we are going to install part number 75118 from Draw-Tite, and we are going to install this on a 2004 Mazda Tribute. Now we will show you our attaching points: they are going to be here, here and here. And it is going to be the exact same thing on the drivers side of the vehicle. We will use a wire pull first. We will push it through the bolt hole that we are going to use, out the end of the frame, and then attach our hardware to it. First we will start off with the plate and then we will end up with the carriage bolt, and we will repeat for the rest of the holes in the frame.

All right, with all the hardware installed, we can go ahead and lift the hitch into position. And we will use a couple of nuts to get it stable on a couple of bolts. This is kind of awkward, so it is good to have an extra set of hands to help hold up the other side, although you can leave it on the exhaust side and do one side at a time. All right, once you have it loosely installed, you can move it back and forth just a little bit to get it centered up, and then go ahead and snug down the fasteners. OK, once you have the bolts snugged down, go ahead and torque the bolts down as specified in the instructions. OK, with the bolts fastened down, that is all it takes. And there you have it for part number 75118 from Draw-Tite.

This Product Fits The Following Vehicles

2001 - 2004 Ford Escape

2001 - 2004 Mazda Tribute

Customers Who Purchased This Trailer Hitch Also Bought...

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $4.99

Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs $17.78

Hitch Ball with 2" Diameter and Medium Shank, 6,000 lbs GTW - Chrome $8.49

American Flag 2" Trailer Hitch Receiver Cover $14.95

Hitch Ball with 1-7/8" Diameter and Medium Shank, 2,000 lbs GTW - Chrome $8.49

Customer Reviews - Write a review about this product