Atwood Trailer Coupler - 75074
Atwood Flat Nose Coupler
An excellent alternative to tow rings or pintle hooks, the Atwood pull-type coupler is a strong positive hitch system for flat nosed trailers.
- Capacity: 25,000 lbs.
- Tongue Weight Capacity: 5,000
- 4 mounting holes are 4-1/2" apart
- Uses a 2-5/16" hitch ball
Customers Who Purchased This Trailer Coupler Also Bought...
Replacement parts available for this product
Ask the Experts about this Atwood Trailer Coupler
Do you have a question about this Trailer Coupler?
- Coupling and Uncoupling an Atwood Flat Nose Trailer Coupler, 75074
- Actually, to couple or uncouple the Atwood Flat Nose Trailer Coupler, 25K, item # 75074, you will need to remove the pin and pull the lever down. You will not be able to put the pin back in the lever to hold it open.
view full answer...
- Do You Have a Coupler Lock for the Atwood Flat Nose Trailer Coupler
- At this time we do not carry a coupler lock that will work with the Atwood Flat Nose Trailer Coupler, item # 75074.
If your trailer has a flat mount coupler that has 4-1/2 inch mounting holes, and is within the 25,000 pound weight capacity and 5,000 tongue capacity of the Atwood Flat Nose Coupler, item # 75074, then it will fit. This coupler requires a 2-5/16 inch ball.
view full answer...
- Which Hitch and Ball is Need for a Ford F-650 to Pull a 21,000 Pound Trailer with Flat Nose Coupler
- The 75074 Flat Nose Coupler from Atwood is built to attach to a 2-5/16 inch hitch ball. Double check any markings on your coupler to make sure. At that weight though, 2-5/16 is the standard.
The next question is what hitch is installed on your F-650. I would imagine it is 3 inch square opening receiver hitch, but please double check for me so that I can make sure we find the appropriate solution.
If it is indeed a 3 inch hitch, you will need something like part # RP38180 from Reese. Or if
view full answer...
- How Atwood Flatnose Trailer Coupler Operates and Availability of Replacement Pin
- I walked out to our warehouse to checkout the Atwood Flat Nose Coupler, part # 75074, to see how it operates. It is like you stated, you pull the pin out, move the handle forward, attach to ball, move handle back and attach pin.
We do offer a replacement safety pin for part # 75074. It is Replacement Pin for Atwood Coupler, part # 70897. The pin measures 1.38 inches long, and has a diameter of .38 inches. It stays in place with a ball detent on the end of the pin.
I have linked the rep
view full answer...
