22x56 Folding Polypropylene Cargo Carrier

Draw-Tite Hitch Cargo Carrier - 7507

This Rola carrier has the addition of a folding shank to fold the tray when you don't need it. Simply relocate the stablizing pin to secure the tray in an upright position, virtually effortless! The carrier is rust resistant and has a 500-lb capacity.

Folding Polypropylene Cargo Carrier

Features:

• Light weight molded carrier platform folds up when not in use
• Platform is supported by steel support bars
• Solid floor helps keep road grime off your gear
• 2 piece platform construction bolts together in minutes
• Hitch pin and clip included
  • Hitch locks and anti-rattle devices are available to better secure the carrier when in the hitch

Specs:

• Fits 2" x 2" trailer hitches
• Capacity: 500 lbs
• Dimensions:
  • Overall:22" wide x 56" long
  • Platform (usable space): 20-1/2" wide x 53" long
• Weighs only 43 lbs
• Distance between the center of the hitch pin hole and the folded tray: 6-3/4"
• Distance from center of hitch pin to edge of carrier: 11-1/2"
• Height of carrier from the center of the hitch pin hole to top of carrier: 8-1/2"
• Distance from center of hitch pin to edge of folding adapter: 4"
• Height from center of hitch pin to top edge of adapter: 5-1/2"

Folding Polypropylene Platform Hitch Mounted Cargo Carrier by Draw-Tite, Hidden Hitch and Reese

Video of 22x56 Folding Polypropylene Cargo Carrier

Customers Who Purchased This Hitch Cargo Carrier Also Bought...

Ask the Experts about this Draw-Tite Hitch Cargo Carrier
Do you have a question about this Hitch Cargo Carrier?

• Will the Folding Polypropylene Carrier Fit the Jeep Wrangler 2006 and fold With the Spare in Place
  
• Yes, the 22x56 Folding Polypropylene Cargo Carrier will fit in your 2 inch receiver hitch. You will have to measure to determine if the carrier will fit when folded with the spare tire in place. If you measure from the center of the hitch pin hole to the point where the spare tire sticks out the farthest you will have the measurement needed to determine if the carrier will work with the spare in place. On this carrier the distance to the folded carrier tray from the center of the hitch pin ho
  view full answer...


• Recommend Folding Hitch Cargo Carrier To Carry Suitcases
  
• The item you selected, Draw-Tite Hitch Cargo Carrier, part # 7507, will work great to carry luggage. To install part # 7507 on your vehicle, you must have a 2 Inch Receiver Hitch or have one installed. Another carrier I would recommend is the Curt Hitch Cargo Carrier, part # C18131, which is also a folding cargo carrier but has raised side rails to help keep cargo secure. To keep your luggage secured to the cargo carrier, I would recommend Master Lock Cargo Tie Downs, part # 3042DAT. To
  view full answer...


• Will Draw-Tite Hitch Cargo Carrier # 7507 Work On A Chevy TrailBlazer XT To Carry Six Golf Bags
  
• The Draw-Tite Hitch Cargo Carrier, part # 7507, is made of a composite polypropylene so the exhaust is unlikely to cause any of the cargo carrier to melt. The carrier also has a shank that has a rise on it to help keep the cargo away from the exhaust outlet. The platform has a usable space of 20-1/2 inches wide by 53 inches long. You will want to make sure your golf bags are close to 53 inches or less so they will fit on the platform. If your Chevrolet TrailBlazer XT has a 2 inch hitch, this
  view full answer...


• Securing a Moped/Bike to a Draw-Tite Hitch Cargo Carrier # 7507
  
• Yes, there is a way to secure your moped/bike to this 22x56 Folding Polypropylene Cargo Carrier, part # 7507. You would want to use Master Lock Cargo Tie Downs, part # 3065DAT, and then use the attachment holes that are on the # 7507 to attach the moped/bike to the carrier. I would get two sets of the # 3065DAT, and then secure the bikes by attaching one set of the tie downs to the handlebars of the moped and then down to the holes of the # 7057. Check out the picture to the right to get an i
  view full answer...


• What Is The Height of Draw-Tite Hitch Cargo Carrier # 7507
  
• I walked out to our warehouse, assembled the Draw-Tite Hitch Cargo Carrier # 7507, and produced a short video showing the measurement from the center of the hitch pin hole to the top of the carrier. The overall height of the carrier from the hitch pin hole to the top of the carrier is 8-1/2 inches. I have linked instructions and a video review of the Draw-Tite Hitch Cargo Carrier, part # 7507.
  view full answer...


• Will a Wagon with a 21 inch Wheel Base fit the 22x56 Folding Polypropylene Cargo Carrier, # 7507
  
• The deck measurement on the 22x56 Folding Polypropylene Cargo Carrier, # 7507, is 20-1/2 inches if you were to measure from inside edge to inside edge. That would be for the entire width of the carrier including the corners. If you were to measure from the outside of one end to the outside of the other, it would be 22 inches. The wagon may fit, but it would be very close with little room for error. A better fit would be # 52018F. It has a deck dimension of 24 x 60 inches. I have included a li
  view full answer...