Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
25 reviews
Code: 70647
Retail:$259.32
Price:$163.95
Shipping Weight: 32 pounds
Shipping SpecialThis durable, fully welded vehicle trailer hitch receiver features a powder coat finish over an e-coat base to ensure superior corrosion resistance.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Hidden Hitch Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are working on a 2000 Ford Explorer. We will be installing Hidden Hitch part number 70647. This will also be comparable to Draw-Tite part number 75083. Here are a couple of measurements that will assist you in ing accessories for your new hitch, such as a bike rack, cargo carrier, or draw bar. From the center of the hitch pin hole to the outermost portion of the bumper it is 3-3/4 inches. From the top of the receiver tube to the ground is 15-3/4 inches. Now let us go ahead with the installation. 0:30
Before installing our hitch, let us point out some mounting holes. We got a pre-drilled hole here in the bottom of the frame on the drivers side. We also have one here on the side of the frame on the drivers side. This will be our rear most mounting point on the drivers side and it will be identical on the passengers side. With our holes pointed out, we will go ahead and show you our fasteners that will go through the bottom side of the frame. We will be using a bolt and block fasteners. We will put those together and feed them down into our frame. The other side of our hardware will be a conical tooth washer. The teeth of the washer will face the hitch and our nut. 1:10
Now we are ready to put our hitch in place. It is good to have an extra set of hands while you put the hitch in place. Just install our fasteners finger tight this time while we get all of our hardware in place. Our vertical holes, we use the bolt and lock style also. We will be using a lock washer and nut on our vertical fastener. With all of our fasteners installed, let us go ahead and tighten everything down. With everything tightened down, we torque to specifications as indicated in the instructions. With all of our fasteners torqued to specifications, that completes the installation of Hidden Hitch part number 70647.
1997 - 2001 Mercury Mountaineer
1991 - 1994 Mazda Navajo
1991 - 2000 Ford Explorer 2 and 4 Door
2001 - 2003 Ford Explorer 2 Door
2001 - 2001 Ford Explorer 4 Door
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.8 out of 5 stars (25 Customer Reviews)
by: Will G04/14/2011
Is this review helpful?
This unit mounted easily and perfectly. One-man job, thirty minutes max! The hitch does "lap over" the spare (15"/stock spare) about 1 1/2 inches, but does not block installation of the hitch....might block the removal of the spare, don't know!11776
by: Mike G.04/14/2011
Is this review helpful?
A perfect description and accurate install procedure. I did encounter the sagging spring and shock dilemma that required me to jack up the rear of my Explorer in order to fit the brackets in. Having read about the possibility and prepared myself, made the install go smoothly. The hitch and accessories are top notch and I couldn't have asked for a better product knowing I was the one doing the install.11758
by: Will G04/13/2011
Is this review helpful?
Product arrived much faster (shipping) than expected; staff kept me informed throughout process. Product arrived in good shape, complete mounting hardware/instructions....easy fit/easy install.11626
by: Rusty W.04/10/2011
Is this review helpful?
I have never been displeased with etrailer.com. They are fast and well worth the time and effort.11434
by: Kelly S.01/16/2011
Is this review helpful?
installation Installation was a snap. I had no problems at all and it looks like it is part of my 98 Explorer, not a clunky add-on. I'll be back to etrailer for more stuff. 5556
by: Charkie01/06/2009
Is this review helpful?
poor fit We installed this yesterday, I say 'we' because it took minimum 2 people. It did not fit correctly over the frame rails. The holes did line up, but it did not fit under the bumper of the vehicle. We also had to remove the bumper hitch plate. You may also want to jack up the rear end so that the leaf springs straighten slightly providing some clearence.1500
by: Robert M.10/21/2008
Is this review helpful?
Nice! 1997 Explorer with 15" wheels. Fits good, comes with quality hardware, simple instructions, excellent customer service. A little difficult for a one person install, but I used a floor jack to hold the hitch up while I lined it up. Took a half hour.1369
by: Dave09/16/2008
Is this review helpful?
Great Hitch Fast shipment. Ordered Sunday was at the house Tuesday. Took about 1/2 hour to install with one person but was easy, straight forward install. Was up and towing a utility trailer the same day as received.1288
by: m crawford10/29/2007
Is this review helpful?
best prices anywhere great service, great price, great product, highly recommend ETRAILER470
by: JOHN09/19/2007
Is this review helpful?
GREAT FIT AND LOOK EASY TO INSTALL AND LOOKS GOOD419
by: Russyo06/07/2007
Is this review helpful?
Great product, perfect fit! This product fit perfect, took less time to intstall then estimated. It says it requires modification to the spare tire, only needed to lower the spare tire, install the hitch and then raise the tire back up. less than 10 minutes to install. Took me longer to find the spare tire tools than to install the hitch!!222
by: Tony B06/01/2007
Is this review helpful?
Perfect hitch for Explorers. This was a snap to install. 15 minutes with a single person. Looks Great to.204
by: David05/14/2007
Is this review helpful?
Easy fit on 2000 Ford Explorer Quick (2) man job. Perfect fit on 2000 Ford Explorer 4DR with 16" spare tire. 175
by: Donnie02/03/2012
Is this review helpful?
Easy to insall ,looks great, Was delivered iin two days31027
by: Mike02/01/2012
Is this review helpful?
I had to elongate one hole to get a bolt in but no big deal, it took longer to get the dril then to do the job. Works and looks good.30826
by: Paul D01/26/2012
Is this review helpful?
easy to install is a two person job 15 min. and done 30398
by: Dan W.11/16/2011
Is this review helpful?
Fit perfectly on 2001 Explorer. Very easy to install, you will have to jimmy around your 15" spare no big deal. Great product, great shipping. Information and vidios on web site are very helpful. Will be using hitch to pull a 6 x10 motorcycle trailer.27012
by: Roy S.11/09/2011
Is this review helpful?
Product excellent shape and easy install took 15 minutes to install. Will recommend and buy from again.26773
by: Gary L08/31/2011
Is this review helpful?
Easy install. Holes lined up after loosening bumper on left side. Carriage bolts for upper holes would make job easier.23287
by: Mfro08/27/2011
Is this review helpful?
Nice hitch. Not exactly a 1 man job however. Fortunately my neighbor saw me struggling and came over to lend me a hand. Was difficult to support the hitch and try to line up the mounting holes but after getting the first 2 bolts in, it was all down hill from there. Ran into a problem with the spare tire (2001 Ford Explorer) being in the way. The hitch tends to dig into the spare, unless you can lower the spare and move it over a bit.22921
by: Dave07/26/2011
Is this review helpful?
Great product, prompt delivery, and top notch customer service. Would appreciate hardware included or at least documentation for what is needed, but overall pleased with my purchase. Thanks again to all who were involved in getting the trailer hitch to me. 20273
by: Mike06/27/2011
Is this review helpful?
Easy to install on a 1999 Ford Explorer Sport. Only took about 30 minutes, with half that time spent bending the spare tire support out of the way, and removing the tow hook.18047
by: Kim05/26/2011
Is this review helpful?
I have a 2001 Ford Explorer.This hitch receiver fit like a glove on my truck. Lowered the spare tire and then it was an easy fit.Took about 45 minutes and two people to install.Seems to very good quality.I would definately recommend this item. 15486
by: Thad A.05/25/2011
Is this review helpful?
Very Nice! Easy Installation! 15393
by: AL.L05/08/2011
Is this review helpful?
GOOD VALUE, EASY INSALLATION, QUICK DELIVERY-, HIGHLY RECOMMENDED13089
Ask the Experts about this Hidden Hitch Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
