Weight Distribution 350 Mini for Light Duty Trailer with A-frame Jacks

Reese Weight Distribution - 66024

This weight distribution system is designed for use with lighter weight trailers and fold-down campers.

• No chains or Snap-Up Brackets are Necessary
• 350 Mini works with any 2" Receiver Hitch
• Maximum Tongue Weight Capacity of 350 lbs
• Gross Trailer Weight of 3,500 lbs
• Includes 2" Hitch Ball, Adjustable Hitch Bar, Spring Bars, Pins and Wear Pads
• 26" Long Spring Bars
• Spring bar brackets ride on friction pads to reduce sway
• Shank can be used in either the rise or drop position
• Designed for use with light weight trailers that have an A-frame jack

Reese Weight Distribution Reviews

Be the first to review this Weight Distribution - 66024

Ask the Experts about this Reese Weight Distribution
Do you have a question about this Weight Distribution?

• Are Friction Pads on Mini 350 Weight Distribution System Supposed to be Attached to the Brackets
• When attaching the bracket and the friction pad to the trailer frame, holes must be drilled and countersunk through the pad to match up with the holes in the bracket. The screw would then be placed th   view full answer...
• Class III Trailer Hitch to be Used with a Weight Distribution System on a 2004 Ford Explorer
• I'm sorry, but weight distribution is not compatible with Class II hitches. Class II hitches have a smaller, 1-1/4" hitch opening and lower weight capacities that the Class III and higher hitches with   view full answer...
• Do You Carry Replacement Parts for the Reese Mini 350 Weight Distribution System
• The replacement right hand spring bar for the Mini 350 WD system is part # 66051. The left hand bar is part # 66052. The replacement pads are part # 58105 and the replacement anchor is part # 66032.   view full answer...
• Is Weight Distribution Recommended for Draw-Tite Hitch 75471 on a 2008 Hyundai Santa Fe
• If you are using the Draw-Tite Hitch, # 75471, you cannot use it with weight distribution because it is not rated or recommended by the manufacturer. None of the available hitches allow the use of wei   view full answer...
• Maintaining a Level Trailer Using the Mini 350 Weight Distribution System when Towing
• The shank in the Weight Distribution 350 Mini for Light Duty Trailer with A-frame Jacks, item # 66024, is adjustable and has a max rise of 7-3/4 inches and, in the lowest position, the shank has a ris   view full answer...
• Spring Bar and Head Adjustment on the 350 Mini Weight Distribution System
• The head of the 350 Mini Weight Distribution System , item # 66024 mounts to the shank with serrated washers and a bolt in a slotted hole. You can tilt the head of the system back to raise the ends of   view full answer...
• Weight Distribution and Sway Control for a 2005 Acura MDX and 2300 Pound Starcraft Trailer
• For your 2005 Acura MDX you first need a trailer hitch. If you do not have one, I recommend the Curt Trailer Hitch, # 13328. I have included a video and instructions below. With a hitch rated for weig   view full answer...
• Weight Distribution Brackets Interfere with Gas Bottle Cover
• This particular weight distribution is not adjustable, so if the brackets would end up right under the bottle cover, you will need to trim the cover. You may want to use a weight distribution syst   view full answer...
• Weight distribution System Recommendation for a 2004 Jeep Liberty towing a 17 Foot Casita Trailer
• I would recommend the 350 Mini for Light Duty Trailer with A-frame Jacks, item # 66024 over the Single Bar Weight Distribution Kit, item # 3205 with the Pro Series Friction Sway Control Kit, item # 83   view full answer...