20x60 Cargo Carrier Fits 2" Trailer Hitch Receiver

Draw-Tite Hitch Cargo Carrier - 6501

The 20x60, Draw-Tite cargo carrier is capable of a load weight of 500 lbs. The shank for the carrier is angled for greater ground clearance. Underneath the platform, there are two attachment points for mounting the shank, for a better fit between your vehicle's bumper and the carrier.

Hitch mounted cargo carrier with a 20" x 60" platform. Fits 2" receivers and has a 500 lb. capacity.

• Adjustable fore and aft for best fit
  • Maximum distance measures 11" from the center of the pin hole to the edge of the cargo carrier
  • Minimum distance is 6"
• Mesh floor for easy cleanup
• 3" Side rails to retain cargo
• Shank has 3" rise
• Receiver arm is adjustable from 6" to 11" from the center of the pin hole on the shank to the edge of the cargo carrier
• Attachment holes for load securing devices
• Angled design for maximum ground clearance
• Black powder coat finish resists corrosion
• Rail kit available (sold separately)
• Can be used with the bike adapter bar (part #6505)

The top picture shows a bottom view of the cargo carrier where the Receiver Arm is adjusted for a minimum distance between the bumper and the cargo carrier. The bottom picture shows the maximum distance. The maximum distance measures 11" from the center of the pin hole to the back edge of the cargo carrier.

Customers Who Purchased This Hitch Cargo Carrier Also Bought...

etrailer.com Extra Large Cargo Carrier Bag, 20 cubic feet $69.95

Bike Adapter For Draw-Tite and Reese Cargo Carriers $58.95

Draw-Tite Cargo Carrier Light Kit $37.95

Cargo Carrier Stretch Net $24.95

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $4.99

Ask the Experts about this Draw-Tite Hitch Cargo Carrier

• Hitch Mounted Cargo Carrier for a 2005 Jeep Liberty
  
• We most likely do have a cargo carrier for your application. You will have to measure the distance from the center of you hitch pin hole to the farthest back part of your spare tire to determine the distance you will need for the items you put on the carrier to clear the tire. When you search our cargo carriers you will then notice that they have a measurement from the center of the hitch pin hole to the back of the cargo carrier. As long as the distance is as long or longer than you
  view full answer...


• What is the shank rise on 20x60 Cargo Carrier, part # 6501?
  
• The 20x60 Cargo Carrier - Fits 2-inch Trailer Hitch Receiver, part # 6501, has a 3-inch rise on the shank. What is nice about this cargo carrier is that the receiver arm is adjustable from 6 inches to 11 inches from the center of the pin hole on the shank to the edge of the cargo carrier. It can also be used with the Bike Adapter For Draw-Tite and Reese Cargo Carriers, part #6505, to carry up to 4 bikes, both adult and childrens bikes.
  view full answer...


• Cargo Carrier with Lateral Stability in Hitch for Offroad Use
  
• Lateral stability in a cargo carrier is mostly achieved by proper loading. The load carried should be positioned with the heaviest items to the center, then keep the weight as close to even as possible as you work out to the ends of the carrier. There are 2 ways to increase the stability of your carrier when used. The first is a anti rattle device (see link) that will help stabilize the carriers shank when in use. I would recommend the No-Rattle Trailer Hitch Wedge for 1-1/4 inch and 2 inch
  view full answer...


• Will DrawTite 20x60 Cargo Carrier Part 6501 Fit Other Brands of Hitches
  
• The Draw-Tite 20x60 Cargo carrier, part # 6501, will fit any hitch with a 2 inch opening, regardless of hitch brand. Just make sure that your dealer installed hitch has a 2 inch receiver or is a Class 3 or 4 hitch.
  view full answer...


• Cargo Carrier for Carrying Lawn Tractor
  
• Without knowing how much your tractor weighs or how large it is, I would recommend something like a mobility scooter carrier which has an integrated ramp. If your tractor weighs 500 pounds or less, and your hitch is rated for at least 500 pounds of tongue weight, I would go with the 28x48 Hitch Mounted Wheel Chair and Scooter Carrier with 60 inch Long Ramp, part # SC500. I suspect that unless you have a very small lightweight tractor, your tractor might be too large and heavy to be safely carrie
  view full answer...