Tow Ready Trailer Hitch Mounted Railed Cargo Carrier by Draw-Tite, Hidden Hitch and Reese
- Features:
-
- Raised shank elevates carrier platform for better ground clearance
- Stylish design
- Black powder coat finish resists rust and corrosion
- Optional light kit available
- Capacity: 500 lbs.
- Specs:
-
- Fits 2" x 2" trailer hitches
- Measures 12-3/4" from the center of the hitch pin hole to the carrier platform
- Bend in support arm raises platform 2-1/2"
- Inside Dimensions: 24" x 60" x 5-1/2" (rails)
- Overall Dimensions: 25-1/2" x 61-1/2" x 5-1/2" (rails)
- Weight Capacity: 500 lbs.
- 3 piece design requires assembly
- Pin and clip sold separately
Alternate # 63152; Replaces Draw-Tite # 40101.
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
Great Carrier - Minor Defects
Javen H from Denver, CO
I purchased this carrier, which for it's size and capabilities, this is a great deal. However, a couple of minor issues you need to be aware of. First off, there were a couple of minor defects where some weld had dripped on this rack, then was painted over, leaving a couple of large bumps on the surface. Secondly, and more importantly, I had to use washers as spacers along the support tube to prevent the platform from seperating at the center joint. No big deal, just be aware that before you assemble, to place a washer on each side of the support tube prior to inserting bolts. This will prevent the bolts from pulling the center joints apart. Lastly, the mesh flooring did not have big enough spaces to run the connectors for the tail light kit as described in the instructions. Be prepared to cut and splice the wires in order to have a professional looking installation.
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
A GREAT CARGO CARRIER!!!
Billy M. from Virginia Beach, VA
Super easy to put together. One of the nicest carriers I have ever seen. I would also highly recommend you buy the taillight kit, makes the carrier stand out especially at night. Looks great on my FJ Cruiser.
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
Solid carrier
GMC Acadia from Midwest
The carrier comes in 3 pieces, but is very easy to put together. I'd highly recommend using an anti-rattle locking hitch pin (something similar to 76820) to tighten this up in the hitch. Without something like that, the carrier isn't real stable and can rock back and forth a little bit. With the anti-rattle hitch pin, you can get it snugged up pretty good so that it is a solid platform.
I only have limited use so far, so my reliability and performance scores can be taken with a grain of salt at this point.
