Rola Hitch Accessories - 63145-1
- Fits 2" x 2" trailer hitches
- Fits 5/8" diameter hole
- Acts as an anti-rattle device
- Requires hitch accessory to have a hollow shank
- Not recommended for use when towing a trailer
Trailer Hitch Pin and Anti-Rattle Device. Block with spring is placed inside the hitch accessory (bike rack or cargo carrier) and drawn to the side of the hitch tube when the pin is tightened. This pushes the hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration.
Customers Who Purchased This Hitch Accessories Also Bought...
Ask the Experts about this Rola Hitch Accessories
Do you have a question about this Hitch Accessories?
- Will the Rola Anti-Rattle Device # 63145-1 Work on a 2 inch Hitch Extension Tube
- Yes, the Rola Silent Hitch Pin, # 63145-1, will prevent the extension from rattling inside the 2 inch hitch, as long as the extender you are using is hollow.
Please note, that when using an extension, the tongue weight capacity of the hitch is reduced by 50 percent so the total weight of the bike rack and the bikes on it must be less than 50 percent of the tongue weight capacity marked on the hitch.
view full answer...
- Silent Hitch Pin for Valley Cargo Carrier V90180
- The Silent Hitch Pin with Clip # 63145-1 would work with the Valley Cargo Carrier, # V90180, but there is not a lock available for this hitch pin.
I would recommend the Anti-Rattle Device and Lock # 63232 because it is both pin and lock in one unit.
The Rola Polypropylene Cargo Carrier # 59500 is a good carrier. It will not rust, it is light, and it can hold almost as much as a metal carrier. It does not come with a hitch pin nor does it fold up when not in use. If the exhaust from your ve
view full answer...
