Draw-Tite Ball Mounts - 63012
Pintle Hitch Combo with 2-5/16" Trailer Hitch Ball
- Capacity (as Pintle): 16,000 lbs maximum GTW
- Capacity (as Ball): 14,000 lbs maximum GTW
- 3,000 lbs maximum vertical load (tongue weight)
- 2-5/16" diameter hitch ball
- Ball hole diameter: 1-1/8"
- Mount hole spacing: 3-3/8" (left to right) and 1-3/4" (top to bottom)
- Mounting hardware included
Replaces 43022
Customers Who Purchased This Ball Mounts Also Bought...
Ask the Experts about this Draw-Tite Ball Mounts
- Which Pintle Balls are Compatible with Pintle Hook 63012
- I pulled these two parts off the shelf and you can swap ball # 63018 onto the pintle in part # 63012.
If you only need a 2 inch ball and not both balls, you can order part # TR63011 which is the same pintle with a 2 inch ball.
The note you read on the bottom of the page on part # 63018 pertains to a different manufacturer of pintle hooks.
view full answer...
- What is the Ball Weight Capacity of the Tow Ready Pintle Combo 63012
- The ball weight carrying capacity of the Tow Ready Pintle Combo, part 63012, is 14,000 pounds.
When used as a pintle with a lunette ring, the capacity is 16,000 pounds.
view full answer...
- Difference In Pintle and Regular Mount, and Availablity of Pintle Mount For 2011 Ford F-350
- A pintle hitch ball is designed to be used with trailers that use Lunette Rings, a regular or conventional hitch ball is designed to be used with trailers that have couplers. You would typically find trailers with Lunette Rings on industrial or construction type trailers.
For a pintle towing setup, you will need a pintle draw bar, pintle ball, pin and clip, wiring, and brake controller.
For a draw bar, I would recommend Titan Forged Pintle Hook Mounting Plate, part # RP45294, which will f
view full answer...
- What Size are the Mounting Holes on Draw-Tite Pintle Hook Combo # 63012
- I walked out to our warehouse and measured the mounting holes of the Draw-Tite Pintle Hook Combo # 63012. The holes measured 1/2 inch in diameter, and the kit includes the necessary 1/2 inch bolts.
If you have the Titan Forged Pintle Hook Mounting Plate # RP45294, it will match up to attach to the Draw-Tite Pintle Hook Combo # 63012.
You will also need to use a 5/8 inch diameter pin like the Titan Trailer Hitch Pin and Clip, part # 74149.
view full answer...
- Operation Details of The Draw-Tite Pintle Hook Combo # 63012
- The Pintle Hook Combo # 63012 can be used for trailers that have a pintle hook setup that use a lunette ring, or for trailers that have a coupler and attach to a hitch ball.
You cannot use the pintle to lock or secure the trailer to the hitch ball. To use the hitch ball, your trailer would need to have a 2-5/16 inch coupler to secure to the hitch ball.
If you have a 2-1/2 inch hitch receiver, you will need to use Pintle Hook Mounting Plate, part # RP45294. If you have a 2 inch receiver, yo
view full answer...
- What is the Capacity of a Pintle Hook Combo Hitch when Used with a 2 Inch Ball
- If you were to use a 50mm ball or the 2 inch ball # 63018, you will need to go by the ball capacity since it will most likely be lower than the pintle hitch capacity. In the case of # 63018, the capacity is 10,000 pounds.
If using it as a pintle, it would have a 16,000 pound capacity. If you only needed the smaller ball though you could just use pintle hook combo # TR63011.
view full answer...
