Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
6 reviews
Code: 60816
Retail:$205.94
Price:$129.95
Shipping Weight: 31 pounds
Shipping SpecialSpecially designed for light-duty applications, this fully welded vehicle trailer hitch receiver features a powder coat finish over an e-coat base to ensure superior corrosion resistance. Drawbar, pin and clip included.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on this 2010 Hyundai Sonata we are going to install part number 24757 from Draw-Tite. This also applies to part number 60816 from Hidden Hitch. The first thing that we need to do to start off is we need to remove this panel right here. What is going to happen is the arm of the hitch is going to go right through this part of this right here. So we are just going to take it down and leave it off. It really does not serve much of a purpose and the hitch will be in the way anyways. It looks like there are two fasteners hiding back here too, one here and here. You can see that this is where, if the vehicle had dual exhaust, it would be in this spot here. So that is what that panel did, basically enclosed that area. 0:38
With the panel down, now we can see the attachment points on the vehicle. We are going to use this hole right here which has factory threads inside which makes it easy. And it is also going to use the center tie-down loop on the on the trunk panel. It is going to be the same thing over on the passenger side. However, the exhaust is going to be right next to it so it will be a little tight of a working area. But, we should not have to take down the exhaust. The first thing we do to start installing the hitch, we will start off with the U-bolt that goes over the tie-down point first. We will hang the hitch from that and then we will leave it loose so we can work our hitch around to line up with the holes on the side of the frame. 1:18
A quick bit about these fasteners. This is the bolt that goes inside the frame rail and this is the conical tooth washer. And they go together just like that. Okay, we have that one installed but we are going to leave it loose because we still need some working room back over on the other side, and that is going to be on the passenger side with the exhaust. Once we have all of our bolts started, then we can go ahead and snug them down into place. Alright, now that we have all of the bolts snugged down, we will go ahead and torque the bolts down as specified in the instructions. With those few steps our hitch is already installed and there you have it for part number 24757 from Draw-Tite. From the top of the receiver opening down to the ground on this particular vehicle it is 10-1/2 inches. And from the center of the hitch pin to the outer edge of the bumper is about 6 inches.
2006 - 2010 Hyundai Sonata All Models
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
by: Sean F.07/06/2011
Is this review helpful?
Arrived quicker than expected. Easily installed in about 20 minutes. Meets up to it's name, you can barely tell it's even there. Fit perfect. 18751
by: Alan L.07/04/2011
Is this review helpful?
Simple installation with provided hardware, wiring harness just plugs into existing plugs/tail lights, great fit. Took less than hour to install with wiring. Looks great.18466
by: Bob L05/28/2011
Is this review helpful?
Very easy to install. Only trouble was getting around the exaust. 15590
by: Dietrich S04/21/2011
Is this review helpful?
Good Products at a good price. I was amazed how well they followed up on the shipping. They sent me e mails every step of the way. What a Great Company! Dietrich from West Bend Wi.12171
by: robert P04/16/2011
Is this review helpful?
thank you it ws very easy to install and i had to do it in my drivway on the dround your right about the time it taked just 45 min for me to do it now i will see how it will tow my small 14 ft boat as it seems it will do great thanks again11857
by: Dale D.02/28/2011
Is this review helpful?
The product was delivered on time. The wiring kit was very easy to install after reviewing the video. The trailer hitch lined up prefectly and the hardware fit great. This company provides a very good product at a most reasonable price. I am a very satisfied customer and will be looking here first for all my trailer needs.8109
Ask the Experts about this Hidden Hitch Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
