E-Track Wood Beam Socket

Erickson Trailer Cargo Control - 59149

E-Track Strap Wood Beam Socket

• For 2" x 6" Boards

Customers Who Purchased This Trailer Cargo Control Also Bought...

Ask the Experts about this Erickson Trailer Cargo Control
Do you have a question about this Trailer Cargo Control?

• E-Track Wood Beam Socket Has a Bottom
  
• The E-Track Wood Beam Socket, item # 59149, does have a bottom for a 2 x 6 to rest on , and it is 3-1/2 inches tall.
  view full answer...


• E-Track Wood Beam Socket
  
• I am sorry, but we do not offer a plastic wood beam socket that installs with tape on the back at this time. The only wood beam socket we offer is the E-Track Wood Beam Socket, part # 59149.
  view full answer...


• E Track Trailer Cargo Control # E19148 Mounting Location for Securing a Harley In Enclosed Trailer
  
• I would recommend that you run the tracks horizontally, that way you could secure your Harley from multiple points around the bike to the E-Track Trailer Cargo Control - Horizontal - 5 Foot Long, part # E19148. I included a link to a video review of this product below for you to check out. I would also recommend using a E-Track 2 inch D-Ring, 3.5K, part # E59143, to make securing your bike with straps easier. I have included a link below to a video of the # E59143 on a horizontal # E19148.
  view full answer...


• E-Track Wood Beam Socket # 59149 Recommendation and Compatibility
  
• You could use a E-Track Wood Beam Socket with the E-track setup that you have. I spoke with my contact at Erickson and she went out and put a E-Track Wood Beam Socket # 59149 into an E-Track Trailer Cargo Control # E19148 and found that the # 59149 would not hang over the bottom of the E-track once installed and would work for your setup. I attached a review video for the E-Track system for you to check out also.
  view full answer...


• More Pictures Angles and Dimensions of the E-Track Wood Beam Socket # 59149
  
• I went out to the warehouse and pulled the E-Track Wood Beam Socket, # 59149, and I produced a short video showing the dimensions of the E-Track Wood Beam Socket and took some close up video so you can see how the wood beam socket works. There are 4 holes in the socket for attachment to 2X lumber. The two holes on the bottom are centered and positioned at 1/2 inch and 1-3/4 inches in from the inside of the bracket. The two holes in each side of the bracket are positioned at 1-1/8 inch in, for
  view full answer...


• Mounting E-Track Wood Beam Socket # 59149 Upside-Down
  
• The E-Track Wood Beam Socket you mention, part # 59149 can be mounted in any orientation you wish.As you can see in the photo I provided, the slots in the E-Track measure 2 inches apart on center. Moving from one slot to the next would provide 2 inches of adjustment. There is a small amount of side-to-side movement once the beam socket is connected to the E-Track.
  view full answer...