See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Cargo Carrier > Enclosed Carrier > Swinging Carrier > Fits 2 Inch Hitch > Class 3, Class 4 > 13.5 Cubic Feet > Molded > 250 lbs > Rola

 59109   59109   59109   59109   59109   59109   59109  

Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch

Rola Hitch Cargo Carrier

Rating: ratingratingratingratingrating
10 reviews


Code:   59109

Retail:$791.76

Price:$625.95

Shipping Weight: 110 pounds

Shipping Special
Quantity: 




Rola Hitch Cargo Carrier - 59109

This enclosed carrier is everything and more. With a swing away carrier, you can easily access the back of the vehicle without having to remove the carrier or any items. The pod has a roomy storage compartment of 13.5 cubic feet and is weather resistant. Great for any road trip!

Rola Enclosed Swinging Cargo Carrier for 2" Trailer Hitch Receivers

The multi-purpose storage container is removable to help carry or store your gear while the weather resistant durable design protects it.

Features:
  • 250 lbs. capacity
  • Tray can be used without the container
  • Enclosed Container holds 13.5 cubic feet of gear
    • Light weight container weighs only 30 lbs.
    • Container and cargo can be removed from the tray
    • Container is secured to the tray with locking latches
    • The lid of the container also locks with the same keys that secure the container to the tray
  • Carrier swings to the side to allow for unrestricted access to the rear of the vehicle.
  • Weather resistant
  • Includes license plate mounting points
  • Includes tail light kit
    • Optional license plate light sold separately (#59117)
  • Shank is hollow and anti-rattle lock can be used
Specs:
  • For use with Class III and Class IV 2" x 2" trailer hitches
  • Outer Dimensions of Tray and Pod
    • 53" Length x 27" Width x 21-1/2" Tall
  • Dimensions of Tray Only
    • 53" Length x 27" Width x 5.4" Tall
  • Outer Dimensions of the Pod Only
    • 53" Length x 27" Width x 19" Tall
  • Inner Dimensions of the Pod Only
    • Bottom of Pod: 47" Length x 21" Width
    • Pod is widest in the middle: 52" Length x 26-1/2" Width
    • Pod Opening is 46" long and 20" wide
    • Inside of Pod is about 17" tall
  • Measures 13" from the center of the hitch pin hole to the back edge of the carrier
    • 5" with the lid open
  • Measures 34" from the center of the hitch to the pod when in the swung out position
  • Heavy duty swing arm is constructed of steel
  • Pod is made of a polypropylene
  • Limited 5 year warranty



Replaces #59111



Video of Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video assembly rola swinging cargo carrier 59109
Rola Swinging Hitch Mounted Cargo Carrier Assembly
Video review of Rola swinging cargo carrier 59109
Rola Swinging Hitch Mounted Cargo Carrier Review

Video Transcript for Rola Swinging Hitch Mounted Cargo Carrier Assembly

First were going to stick the bottom half of the assembly into the hitch, we will start from there. Next well start installing the outriggers they will go on the bottom and support the cargo carrier itself. The next step we need to do is go ahead and install the wire harness. What we need to do first is go ahead and unpin the hinge mechanism and unfold it so we have plenty of working room to run our wires. Now we can go ahead and install our wiring, first we will install a zip tie loosely around the tube and then we will run our wires through it and then snug it up to secure it, to keep it from moving anywhere. We will leave all the zip ties reasonably loose for now, because we still have to work around and make sure we have plenty of length where the plugs connect to the cargo carrier as well as to the vehicle. Next thing we need to do is take apart the tray from the cargo box itself. We will go ahead and close the fold mechanism back up and we will start building on top of that.

We will go ahead and separate the cargo box from the tray, we will undo the latches, pick it up with some help and set it to the side. Now we will lay the tray itself onto the swing away assembly, and then we will line up our bolt holes. As you can see the tray has slots in it for where the rails fit into, so make sure you get it in the right spot. You can slide it right into place. Now that we have the tray in place, lets bolt it into position. If you notice there are eight holes in the tray and there are only four bolts. Its okay because the assembly only uses four bolts. It uses the outside holes for the installation. Now that we have our bolts in we will go ahead and install the nut and washer assemblies. At this point you go ahead and tighten all the screws down. The cargo carrier platform is installed, we can get back to the wiring, go ahead and hook it up, take up our slack and send the rest of it back to the trailer hitch. Go ahead and snip off the excess to keep it nice and neat. That pretty much finishes up the installation of it. We can go ahead and close it up, put our cargo carrier on there and test the operation of it. The cargo box itself is installed we will go ahead and check the locks for operation and your install will be complete. As you can see, relatively easy assembly, you only need a few hand tools. It is nice that it comes with this specific alan key with it. It should take you no more than twenty minutes to assemble.






Customers Who Purchased This Hitch Cargo Carrier Also Bought...



Replacement parts available for this product






Customer Reviews  -  Write a review about this product

Rola Swinging Enclosed Cargo Carrier for 2 - 59109

Average Customer Rating:  ratingratingratingratingrating3.2 out of 5 stars   (10 Customer Reviews)




Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: Mark A10/03/2010

Is this review helpful?


Excellent Product Easy to assemble, everything works smoothly and all assembly holes line up perfectly. Just used this unit on our first family vacation, and even while loaded to the limit with heavy luggage the very heavy steel hinge handles the load with ease even in the full swing out position. The locks are on the lightweight side but with proper care should be no problem. 3496



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: JV09/19/2010

Is this review helpful?


Extra Space Has the extra space I need for my minivan. I also use a dual hitch extension. It raise the cargo carrier (for better ground clearance) and it move it further back (allow opening the rear hatch without swinging the cargo carrier open).3466



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: KD5NDR06/02/2010

Is this review helpful?


Nice Product I bought this product for my SUV. I haven’t used it yet, but the assembly was easy. Even though the product says it’s water resistant, I believe that with the size of the lip and the design that everything will stay dry like it was water proof. The only thing I wish the product company had done differently was to build a better license plate mount into the design; the attachment location is not the best. I don’t like the idea of drilling or using self tapping screws on my new box. The box is a nice size and will be a great addition on long trips with a large group. 3087



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: goodguy2311/08/2009

Is this review helpful?


Stinks, leaks. Locks suck. Don't buy this unit. It is poorly constructed and the company won't stand by their warranty. The hinges on mine bent because they never used backers on their rivets and now it leaks. The locks are pieces of junk and half the time don't work. If they get these flaws fixed it is will be a great unit. Right now, stay away.2534



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: Stevo07/22/2009

Is this review helpful?


Not worth the money! Get Thule The Hitch plug bounces in the receiver because it is a few millimeters too small. The package was missing washers and bolts. The keys and locks are garbage . I am upset I chose this over Thule !2156



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: jhb07/09/2008

Is this review helpful?


Will suit my needs I purchased the swing away model. Its bulk requires two people to move safely when empty, though I have moved it myself. There is no point to having the unit for extra space but not being able to get to the back ½ of the vehicle. Defeats the purpose! The unit requires some assembly of the metal hitch mounted carrier to the plastic tray. The instructions recommend you mount the hitch into your car receiver and I echo that. During assembly, I ran into a problem. The washers that came with the unit were not correct. They sent eight ½ inch fender washers which could not be used. They sent four 3/8 inch washers which I actually needed 12 of. I had to purchase 8 more 3/8 washers to finish the assembly. Not a big deal, but inconvenient. It looks like they sent me a tilting hardware pack with the swing away model. I also purchased the license plate kit. This involved drilling a 1” hole in the tray. I was not thrilled about drilling the hole in my new tray. The other problem is that drilling the hole is not trivial. A 1” twist drill is probably not in everyone’s tool kit. You can not use a wood spade bit as it will drill a hole through the 2nd wall of the shell before you get the hole drilled in the 1st wall. I used a hole saw with no center tap. I drilled a piece of wood and used that to guide the saw into the tray where I wanted it. Other than that, the installation was straightforward. Upon opening the box I made the following observations. The shell of the pod seems adequate. I plan to use the pod for Ski trips and I hope that the plastic does not get to brittle in the cold weather. A cracked shell will render the unit worthless. I would like to have seen a better attempt at waterproofing the lid. Also, the pod drain in the literature is essentially a hole drilled in the bottom of the unit and a small friction fit plug you fit into it. Just seems flimsy to me. If the plug pops out, water could enter the unit without warning. The clips that hold the lid down and keep the pod in the tray look light to me. I have seen these types of brackets on my hardshell golf case and have had problems with them breaking. I suppose there is not a lot of stress on these but know from experience I will have to be careful in using them just the same. I especially feel that care will be needed when removing the pod from the tray. Be sure to close the clips on the pod bottom before putting the unit on the ground or you could break them. They hang down below the pod bottom. And don’t consider the clip’s locks as security locks. The locks will keep the clips from opening unexpectedly, but won’t keep a determined thief out for even one minute. I initially thought the removable pod and tray might be an asset. I now feel it to be a liability. I doubt I will ever use the tray without the pod, and now have a potential point of failure between the pod and tray. It does help to be able to remove the pod when mounting the hitch bracket as it is heavy and awkward. In all, I think this unit will meet all my needs. While I have some reservations about the Rola as noted, I seriously doubt I will have problems. Besides, it comes with a 5 year warranty! If I do have problems, then stay tuned as I will post back when I have more experience with the unit.1041



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: MAANPA06/18/2008

Is this review helpful?


Happy with product and company Installed this on our Jeep Rubicon. Installion was a breeze as long as you follow the instruction. Be sure the wiring for you lights are on the bottom of the cargo frame. If not you will find out why real fast when trying to lock unit in place. My wife and I are very happy with the product. GREAT PRODUCT. Also doing business etrailer was very smooth and enjoyable. Getting ready to buy some other items we need from them now. Great Company. They would of got EXCELLENT, but I only give that to my family.973



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: Ron06/18/2008

Is this review helpful?


Bad placement of Wiring harnes The heat of your exhaust melts the wiring harness. I also lost all the paint off that side of the post due to the heat of the exhaust. The ease of use and ability to open rear door in my opinion does not out weight the down side of the wires melting.972



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: Brook06/08/2008

Is this review helpful?


Could be better. This product is not weather resistant as stated. We have owned our product for 3 weeks and it has rained three times leaving approximately a half-inch of water on the bottom. This also fully soaked all of our luggage, and everything else we had in the carrier.942



Rola Swinging Enclosed Cargo Carrier for 2 - 59109

ratingratingratingratingrating by: John B.10/27/2011

Is this review helpful?


WOW! What a great job. I will definately be ordering from this company in the future. Excellent service and product was delivered on time. Easy to install and great customer care. Job well done!26217




Ask the Experts about this Rola Hitch Cargo Carrier
Expert Answers about Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch - 59109                                             Do you have a question about this Hitch Cargo Carrier?


  • Recommended Enclosed Hitch Mount Cargo Carrier to Carry 3, 6.5 Gallon Water Bottles at 150 Pounds
  • For features, capacity, and versatility, I recommend the Rola Swinging Enclosed Cargo Carrier, # 59109. This carrier includes a light kit, has 250 pounds capacity and can be locked with an included locking mechanism. The enclosed portion can also be removed if desired and you can use the flat portion separately. So it is like having two carriers in one. The pod portion is made of durable polypropylene and the swing arm is made of steel. You will want to make sure to check your vehicle owners
    view full answer...

  • Will the Rola Swinging Enclosed Cargo Carrier Work on a Ford Flex
  • If your Ford Flex has a 2 inch Class III or larger hitch installed on it, the Rola Swinging Enclosed Cargo Carrier, # 59109, will work on your vehicle. You will need to be sure to check the tongue weight capacities of your vehicle and hitch and keep the weight of the carrier and all of its contents below the lowest rated items tongue weight capacity. If you need a Class III hitch for your Flex you can let me know the year and I will be glad to make a recommendation for you.
    view full answer...

  • Will The Rola Hitch Cargo Carrier, # 59109, Fit On A 2010 Jeep Wrangler With Spare Tire On Back
  • To see if the Rola Hitch Cargo Carrier, # 59109, will fit on your 2010 Jeep Wrangler, first there are a few things you will need to check out on your hitch and your vehicle. The Rola Hitch Cargo Carrier, # 59109, can only be used on Class III and Class IV 2 inch hitches. So you will want to check to make sure you have a Class III 2 inch hitch on your 2010 Jeep Wrangler. If you look on your hitch and it says 3,500 lbs towing capacity and 350 lb. tongue weight capacity then it will be a Class I
    view full answer...

  • Trailer Hitch Mount Swing Away Cargo Carrier for a RoadTrek Motorhome, 2002 Dodge 3500 Van Chassis
  • The Rola Swinging Enclosed Cargo Carrier for 2 inch Trailer Hitch, part # 59109, you referenced in your question would be a good choice for your Roadtrek Motor home that is on a 2002 Dodge 3500 Van chassis. This carrier swings far enough to the right that your back hatch door will be able to accessed and opened without any interference from the carrier. I have included a video that shows the functions of this carrier box, an installation video, and a link to installation directions.
    view full answer...

  • Swinging Enclosed Cargo Carrier and Exhaust Heat
  • If your vehicle has the exhaust coming straight out the back, then it could melt the carrier due to the heat created by the engine and exited through your exhaust. The only solution in these situations is to redirect the exhaust down or out to the side of the vehicle. We have many different styles of exhaust tips that may work for your application. I have posted links below to a few parts that may work and also to the our complete exhaust tip selection if none of those will work for yo
    view full answer...

  • Using Rola Swinging Enclosed Cargo Carrier # 59109 on a 2004 Honda CRV
  • The Rola Swinging Enclosed Cargo Carrier, # 59109, will also swing to the right, a bit more than 90 degrees and that should allow full access to the rear of your CR-V. You will need to be sure that you have a 2 inch receiver hitch on your CR-V and that the carrier and all of its contents do not exceed the tongue weight limit for the hitch or vehicle. If you need a hitch for your 2004 Honda CR-V, I would recommend the Hidden Hitch Trailer Hitch, # 87578, for use with this carrier. If you n
    view full answer...

  • How Do I find Hitch Weight Capacity of my Pleasure Way RV
  • The hitch should have the tongue weight capacity stamped or labeled on it. Check to see if you find it there. Also, check the owner manual of the RV to see if it is listed there. You must abide by the lowest of the two figures if they are different. Remember, the weight figures you found are the weight capacity of the carriers. You also have to take into account the weight of the carrier itself. The Rola carrier, part # 59109, has a capacity of 250 pounds and the carrier weighs about 110
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com