Rola Enclosed Cargo Carrier for 1-1/4" (Class II) Trailer Hitches

Rola Hitch Cargo Carrier - 59108

Rola Enclosed Cargo Carrier for 1-1/4" Trailer Hitch Receivers

The multi-purpose storage container is removable to help carry or store your gear while the weather resistant durable design protects it. The carrier is 20 percent larger than comparable models.

Features:

• 150 lbs. capacity
• Tray can be used without the container
• Enclosed container holds 13-1/2 cubic feet of gear
  • Light weight container weighs only 30 lbs.
  • Container and cargo can be removed from the tray
  • Container is secured to the tray with locking latches
  • The lid of the container also locks with the same keys that secure the container to the tray
• Weather resistant
• Includes license plate mounting points
• Includes light kit

Specs:

• For use with Class II 1-1/4" x 1-1/4" trailer hitches
• Outer Dimensions of Tray and Pod
  • 53" Length x 27" Width x 21-1/2" Tall
• Dimensions of Tray Only
  • 53" Length x 27" Width x 5.4" Tall
• Outer Dimensions of the Pod Only
  • 53" Length x 27" Width x 19" Tall
• Distance from center pin hole to edge of carrier: 10-3/4"
• Inner Dimensions of the Pod Only
  • Bottom of Pod: 47" Length x 21" Width
  • Pod is widest in the middle: 52" Length x 26-1/2" Width
  • Pod Opening is 46" long and 20" wide
  • Inside of Pod is about 17" tall

Customers Who Purchased This Hitch Cargo Carrier Also Bought...

Trailer Hitch Receiver Lock - Flush Design for 1-1/4" Trailer Hitch Receiver $19.95

Ask the Experts about this Rola Hitch Cargo Carrier

• How does the Rola Enclosed Cargo Carrier for 1-1/4 inch Hitch Mount on to a 2009 Chevrolet Traverse
  
• The Rola Enclosed Cargo Carrier for 1-1/4 inch (Class II) Trailer Hitches, item # 59108, is designed to fit in Class II 1-1/4 inch hitches only and would install by sliding the included 1-1/4 inch shank into the Class II hitch and securing the carrier with a hitch pin or hitch lock. Since the hitch on your Traverse, with factory tow package, is a 2 inch hitch the Rola Tilting Enclosed Cargo Carrier for 2 inch Trailer Hitches, item # 59110, would have the correct shank for the hitch on your ve
  view full answer...


• Will the Rola Enclosed Cargo Carrier for 1-1/4 Class II Trailer Hitches Fit a 2004 Ford Expedition
  
• As long as the hitch installed on your 2004 Ford Expedition Eddie Bauer edition is a 1-1/4 inch Class II hitch the Rola Enclosed Cargo Carrier for 1-1/4" (Class II) Trailer Hitches, item # 59108, will work nicely. Just remember to check the tongue weight capacity of the hitch and vehicle and keep the weight of the carrier and all of its contents below the lowest recommended tongue weight rating. If the hitch on your Expedition is a Class I hitch then the shank on this carrier will not slide i
  view full answer...


• Can the Rola Enclosed Cargo Carrier for 1-1/4 Inch Be Adapted to a 2 Inch Hitch
  
• Yes, you can use an adapter, but I would recommend purchasing the Rola Carrier that is fitted for 2 inch hitches, part # 59110. If you already have the 59108 carrier or need the ability to use the carrier with both 1-1/4 and 2 inch, then the adapter is the way to go. I would recommend the Brophy Adapter Sleeve, part # HT02 as it has the highest capacity of the 2 to 1-1/4 adapters. It has a tongue weight capacity of 300 pounds. The 59108 cargo carrier weights about 85 pounds, so that would lea
  view full answer...


• What is the Weight of the Bottom Tray Piece on the Rola Hitch Cargo Carrier # 59108
  
• The tray on the Rola Enclosed Cargo Carrier, item # 59108, remains on the assembly brackets and shank that install in the hitch, and this part of the assembly weighs 56 pounds. Total weight of the assembly is 86 pounds.
  view full answer...


• Will The Rola Enclosed Cargo Carrier # 59108 Fit A Class II Hitch On A 2006 Pontiac G6
  
• As long as the Class II hitch installed on your 2006 Pontiac G6 is a 1-1/4 inch Class II hitch the Rola Enclosed Cargo Carrier for 1-1/4 Inch (Class II) Trailer Hitches, part # 59108, will work nicely. Just remember to check the tongue weight capacity of the hitch and vehicle and keep the weight of the Rola carrier and all of its contents below the lowest recommended tongue weight rating. I would also recommend the DeadBolt Trailer Hitch Receiver Lock, part # 7682. You will use this lock in p
  view full answer...


• Will Rola Enclosed Cargo Carrier # 59108 Clear Spare Tire of of 2011 Jeep Wrangler
  
• The Rola Enclosed Cargo Carrier you mentioned, part # 59108 is designed for a 1-1/4 inch by 1-1/4 inch Class II receiver. To determine if it will clear the spare tire of your Wrangler, you will need to measure rearward from the hitch pin hole in your receiver to determine how much clearance is needed to clear the spare tire. The easiest way to do this is to have a friend hold a straight piece of lumber like a 2x4 up flush against the rearward face of the spare tire. Then, measure the distance
  view full answer...