Curt Custom Fit Vehicle Wiring - 56008
Curt Circuit Protected T-Connector Vehicle Wiring Harness
- Provides a 4-pole flat trailer connector for the vehicle
- Installs quickly and easily - simply plugs in to factory connectors
- Does not require cutting or splicing
- Connector has a built-in circuit-protected powered converter
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations
- Powered converter draws power for the trailer lights directly from the vehicle battery, by-passing expensive electrical components on the vehicle.
- Power lead is already run to the plug in the back of the vehicle
- Includes installation instructions
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located under the cargo floor on the passenger side of the vehicle. The 4-pole trailer connector will be stowed in the spare tire storage area when not in use.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
This Product Fits The Following Vehicles
2007 - 2012 Acura RDX
2010 - 2012 Honda Accord Crosstour
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Ask the Experts about this Curt Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
- What is the Correct Trailer Wiring Harness for a 2010 Acura RDX
- I spoke with my contact at Curt and he stated that the Curt T-Connector Vehicle Wiring Harness, # 56008, has not been tested on a 2010 Acura RDX. So you will need to use Curt Wiring, # 56146. I have included a link to the instructions below.
Basically, you will need to hardwire the 56146 wires to the taillight wires by function using a circuit tester like the Quickee # 3808. First connect the white ground wire to an existing ground point or vehicle frame. using the circuit tester, find the wi
view full answer...
- Is the Fuse Included with Curt Trailer Wiring Harness, # 56008 Used on the 2007 to 2011 Acura RDX
- According to the installation instructions for the Curt Trailer Wiring Harness, # 56008, the Acura RDX does not require the fuse. The wiring harness also fits the Honda Accord Crosstour which does require the fuse. However, if you find that your wiring harness is not working, it may need the fuse after all. If so, you can check the owners manual to determine where the trailer wiring harness fuses are located and check those spots in the power distribution box and/or fuse box to determine what, i
view full answer...
- Trailer Wiring Harness for a 2006 Suzuki XL-7
- There is a trailer wiring harness that will plug into a factory port on a 2006 Suzuki XL-7. You will need the Tow Ready Custom Fit Vehicle Wiring, # 118372. I have included links to the installation details and a video showing a typical installation.
The connection point on the vehicle is located behind the rear trim panel, in the cargo area, on the driver side of the vehicle.
view full answer...
Installation Details
