Wiring Harness Installation - 2005 Nissan Murano - Video
Curt T-Connector Vehicle Wiring Harness
- Provides a 4-pole flat trailer connector for the vehicle
- Installs quickly and easily - simply plugs in to factory connectors
- Does not require cutting or splicing
- Connector has a built-in circuit-protected powered converter
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations
- Powered converter draws power for the trailer lights directly from the vehicle battery, by-passing expensive electrical components on the vehicle.
- Includes installation instructions
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the vehicle taillights. Quite a bit of trim panel removal will be necessary to gain access to the connectors. A nylon removal or plastic clip removal tool is recommended. A 10 amp fuse is also included (should be placed in slot 30a in vehicle's fuse panel) to activate the 12 volt battery hook-up. The 4-pole trailer connector will be run underneath the vehicle to the trailer hitch (where it will be stowed) through a hole already in the floor panel. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
See Larger
Instructions
