Draw-Tite Activator Electric Trailer Brake Controller with General Motors Adapter (2003-2006)
With the Act I, Draw-Tite offers you a bit more than the other brake controllers in its class because the sync switch, as well as the output control, have a wider range of flexibility. Draw-Tite's Activator for trailers with electric brakes applies the trailer"s brakes electronically as soon as the brake pedal is engaged, unlike pendulum models which react to inertia created after the tow vehicle's brakes have already begun to stop. The amount of braking power (output) and rate of application (sync) are both adjustable for the individual driver's preference depending on road conditions, type of trailer and load. The driver can control the amount and rate of braking from soft to aggressive and the brakes can be manually applied. What this means for you is a greater comfort range when driving in various road or weather conditions. The Act I lets you fine tune both the speed and amount of power going to the brakes.
- Features:
- Illuminated Output Indicator
- Slide Adjustment Output Control
- 100% Solid State
- No Hydraulic Connections
- No Moving Parts or Pendulums
- Mounts Anywhere - No Leveling Required
- Vehicle specific wiring adapter is included to ease installation
- Three Year Limited Warranty
- Specs:
- Dimensions: 3" Wide x 5-3/8" Long x 1" High
- Made for One and Two-Axle Trailer Brake Systems (2 to 4 Brakes)
- 12,000 lb. trailer capacity
- Mount Anywhere - Leveling is not Required
- Installation:
The vehicle specific adapter has one end with a plug that connects to a port in the black box located under the dash. The other end of the adapter has four bare wires that attach to the four corresponding wires on the brake controller.
Note: If your vehicle has a factory installed hitch and 7-way connector, then all of the wires for the brake controller have already been run. If not, additional parts will be required to complete the installation of the brake controller.
Draw-Tite and Reese Activator Brake Controller 5100 with Adapter 20264
Instructions
