Peterson Round Trailer Tail Light, 2 Stud Mounting, Right Hand

Peterson Trailer Lights - 431800

Stud Mount Three Function Light performs as a stop, turn and tail light. Features a wrap-over lens retained by two screws onto a black plastic housing making the light dust resistant. 1/4" studs includes mounting hardware. 1157 bulb included.

Round, Right Hand, Stud Mount Trailer Tail Light # 428S by Peterson Manufacturing

Customers Who Purchased This Trailer Lights Also Bought...

Ask the Experts about this Peterson Trailer Lights
Do you have a question about this Trailer Lights?

• Availability of a Simple Trailer Lighting Kit for a Wood Chipper Towed Behind a 2004 Ford F-150
  
• Yes, we have simple trailer lighting install kits that simply plug into your 4-Pole connector. For your wood chipper I would recommend the Standard Trailer Light Kit with 25 foot Wire Harness, item # TL29BK. You will not need the side marker lights included with this kit so you can just eliminate them. We also have a kit designed for cargo carriers that would work well on your wood chipper, the Draw-Tite Cargo Carrier Light Kit, item # 6504, does not include the extra side marker lights.
  view full answer...


• Where is the Peterson Round Trailer Tail Light Made?
  
• Yes, the Peterson Round Trailer Tail Light, 2 Stud Mounting, Right Hand, item # 431800, is made in the USA.
  view full answer...


• How To Wire the Peterson Round Trailer Tail Light # 431800 to a 4-Way Trailer Connector
  
• A 4-Way flat connector has the white wire for ground, brown wire for running lights, yellow wire for left turn and brake, and green wire for right turn and brake. The Peterson Round Trailer Tail Light, part # 431800, is a three function light and has two wires coming out of the rear. The brown wire is for running lights and the red wire is for turn signal and brake. The light is grounded to the trailer by the mounting studs on the light. The lights have to be mounted to the metal trailer fram
  view full answer...


• Troubleshooting Dim Trailer Lamps
  
• Determining the cause of your dim lamps will be a process of elimination. I would recommend using a multimeter like part # BTMT15 on the circuits feeding the lamps on your trailer. You should be reading close to 12-volts at each lamp. If you are not, you will need to do some troubleshooting. Test the pins on the trailer connector on your vehicle, you should be getting close to 12-volts at each pin as its function is activated. If you see a dramatic difference in voltage between the vehicl
  view full answer...


• Troubleshooting Dim Peterson Round Trailer Tail Light # 431800
  
• Determining the cause of your dim lamps will be a process of elimination. I would recommend using a multimeter like part # BTMT15 on the circuits feeding the lamps on your trailer. You should be reading close to 12-volts at each lamp. If you are not, you will need to do some troubleshooting. Test the pins on the trailer connector on your vehicle, you should be getting close to 12-volts at each pin as its function is activated. If you see a dramatic difference in voltage between the vehicle
  view full answer...


• What is the Difference Between the Right and Left Hand Versions of Peterson Round Trailer Lights
  
• The difference between the Peterson Round Trailer Tail Light Right Hand # 431800 and the Peterson Round Trailer Tail Light Left Hand # 432000 is that the left side # 432000 comes with a license plate bracket and has a light to illuminate the plate. You could mount part # 432000 and 431800 on either side of the trailer, but then the license plate of your trailer may not be illuminated. You will want to check your local laws to make sure that you can mount the license plate of your trailer on e
  view full answer...