Draw-Tite Ball Mounts - 4285
Ultra-Heavy-Duty Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style trailer hitches
- Uses ball with 1-1/4" shank diameter
- Measures 12" long from center of pin hole to center of ball hole
- Provides 3" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 12,000 lbs GTW and up to 1,200 lbs TW
- Ball Platform 7/8" thick x 3" wide
Customers Who Purchased This Ball Mounts Also Bought...
Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mounts?
- Ball Mount And Brake Controller Recommendation for a 2010 Toyota Tundra
- The closest fixed ball mount we have to a 2 inch rise is the Ball Mount 2-3/4 inch Rise or 4 inch Drop, 6,000 lbs, item # 2753. We also have the Cushioned Ball Mount 2-3/4 inch Rise or 4 inch Drop, item # AMSC4. If you need a higher rated ball mount for your towing needs the # AMSC4 ball mount has a 10,000 pound capacity.
I would recommend the higher 2-3/4 inch ball mount to allow for a bit of rear end sag when a trailer is attached.
We have several 2-5/16 inch balls, you will need to sele
view full answer...
- Material and Construction of Draw-Tite 2 Inch Ball Mount # 4285
- The Draw-Tite Ball Mount, # 4285, does not include a gusset welded between the shank and platform. Basically, it is not needed. This ball mount is constructed of solid steel. The shank is solid with the only hole in it for the hitch pin. It is welded to the platform which is also solid steel.
All of this solid steel construction makes for a heavy ball mount. This one weighs in at over 19 pounds. It is heavy duty enough to earn its 12,000 pound capacity. I also made a short video showing the
view full answer... 
