- Used on Dexter 5,200 lbs and 6,000 lbs axles, or on spindles requiring a 2-1/8" or 2-1/4" I.D. Grease Seal
- Capacity of 3,000 lbs per each
- Drum Size: 12" x 2"
- Bolt Pattern: 6 on 5-1/2 (for information see below)
- Bearings, Races, Cap, and Seal Not Included
- 25580 Inner / 15123 Outer Bearings
- Use either BK3-100 or BK3-110 Bearing Kit
Typical Photos
How to Measure Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number is the diameter of the circle the holes sit on. To determine the diameter on wheels with an even number of bolt holes, measure center-to-center on bolt holes directly across from each other on the circle (Example: 8 on 6-1/2 would mean 8 bolt holes with 6-1/2" center-to-center diameter). When the number of bolt holes is odd, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from it on the circle (Example: 5 on 4-1/2 would mean 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolts).
