Seals for Trailer Bearings > Grease Seal > Single Lip Seal > 2.250 Inch I.D. > 3.376 Inch O.D. > TruRyde

Seals for Trailer Bearings TruRyde 42385

Grease Seal 42385

Rating: rating rating rating rating rating
2 reviews

Code: 42385

Retail:$2.95

Price:$1.95

Shipping Weight: 1 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

TruRyde Seals for Trailer Bearings - 42385

Trailer Hub Grease Seal

Single Lip Seal

For double lip seal see # 10-36

I.D.	O.D.	Use With:
2.250	3.376	#42 Spindle

Seal Cross-Reference
Dexter #	Transcom #	National #	NOK #	Chicago Rawhide #
010-054-00	22333VB	442109	AF3135G1	22550

Customers Who Purchased This Seals for Trailer Bearings Also Bought...

Trailer Hub Bearing $5.95

Race, for 25580 Bearing $2.95

Cotter Pin, 1/8" x 1-3/4" $0.15

Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long $1.54

Shackle Bolt with Locknut for Double-Eye Springs - 3" Long $1.44

Customer Reviews - Write a review about this product

Grease Seal 42385 - 42385

Average Customer Rating: rating rating rating rating rating 5.0 out of 5 stars (2 Customer Reviews)

Grease Seal 42385 - 42385

rating rating rating rating rating by: Mark Mc08/19/2011

Is this review helpful?

Seal was better made than what I took off the old hub. Bearing and race was well finished and fit perfectly. No problems of any kind.22276

Grease Seal 42385 - 42385

rating rating rating rating rating by: Bob Taulbee03/03/2011

Is this review helpful?

I just received then today,all of the measurements look to be the same as the original I will install them tomarrow. I think they should be good.8339

Ask the Experts about this TruRyde Seals for Trailer Bearings
Expert Answers about Grease Seal 42385 - 42385 Do you have a question about this Seals for Trailer Bearings?

Replacement Seal for a Bearing that Reads 14125-A and 25580
You will need to do some measuring but I believe you have it right. My information shows that, for bearing # 14125-a 25580, you have 2 options for seals: #42385 or #10-1. The difference in the seals is the inside diameter of the seal and will either be 2.25 inches or 2.125 inches. The outside diameter of the seal , 3.376 inches, will be the same on both of these seals. You also need to make sure these are not double lip seals and if they are, you will need part # RG06-090. You can order onl
view full answer...

What is the Correct Axle Grease Seal for the Dexter 12 X 2 Brake Hub and Drum
It sounds like you have selected the correct grease seal, # 42385, for your spindle and Dexter hub. The 3.376 outer diameter matches your hub and because the rubber inner part of the seal has to create a tight seal, to keep grease in and road grime out, the slightly smaller diameter is most likely correct. I am sure that if you measured the seal bearing surface, see photo, on your spindle you would get the proper measurement of 2.25 inches. I pulled one of the # 42385 grease seals from our wa
view full answer...