Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
7 reviews
Code: 41926
Retail:$312.90
Price:$240.95
Shipping Weight: 51 pounds
Shipping SpecialSpecially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on this 2005 Ford E-250 full size Van we are going to install part number 41926 from Draw-Tite. I will show you where the frame attachments are on the vehicle. We will use these two holes and this hole going further back to the front of the vehicle. At this point we can go ahead and install our hardware. First off, we will install two bolts at the very end of the frame and we will use those to hold the hitch up into place. Now we can go ahead and install the rest of the hardware. :27
As you can see in between the hitch, on the second hole going towards the front you need to apply a spacer between the hitch and the frame to make up for the gap that will be there. Then we will install the last set of fasteners going towards the front of the van. Now we will tighten down our bolts, and torque them down as specified in the instructions. :50
Now that we have the vehicle off the lift we will go ahead and get you some measurements on the hitch. First off, from the top of the receiver tube to the ground is approximately 15-7/8 inches. From the center of the hitch pin hole to the outside edge of the bumper is approximately 5 inches. There you have it for part number 41926 from Draw-Tite.
2000 - 2003 Ford Van All Full Size Models including Superwagon
2004 - 2012 Ford Van E-150
2004 - 2012 Ford Van E-250
2004 - 2012 Ford Van E-350
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
by: Kenneth Clark10/24/2011
Is this review helpful?
Hitch installed in minutes on my 2003 E-250. Hole lined up perfect. Did not need to move exhaust pipe to install. I used a floor jack and put in the bolts by myself. I would recommend this product to anybody. Shipping was free and it arrived ahead of schedule. 26057
by: Barry06/22/2011
Is this review helpful?
I will install asap. Shipping was super fast.17680
by: Brince M04/09/2011
Is this review helpful?
This is one of the best internet companies that I have dealt with. The shipping was free and not only on time, but early. The price was right, the instructions (video and written) were spot on and the unit fit perfect with no installlation problems. I had a tech question before I ordered and I received an answer from the manufacturer the next day. Great!11414
by: Hunton03/31/2011
Is this review helpful?
Great Customer Service. Great way to keep me in the loop. I will absoultely use you guys again.10806
by: Mike T02/26/2011
Is this review helpful?
It couldn't be any easier to install. Very stong and nice looking hitch.And the wiring pack just makes it so easy and when done ,looks and works perfect.7929
by: Anthony Kougentakis11/19/2010
Is this review helpful?
Lanmark Group Good service. Quality Product3654
by: Larry K02/12/2010
Is this review helpful?
Major chunk of steel that fit I have ordered so many things that I have been forced to return just because they did not fit, that I now expect to return anything I order online. Surprise!!! E-trailer and Drawtite did it right on the first time! Time to remove and replace the OEM hitch was 30 minutes with NO problems - just like the video. I really had no time to do the order over if it was screwed up - it wasn't and I ordered one and UPS dropped it off the next. SWEET!2711
Ask the Experts about this Draw-Tite Trailer Hitch
Installation Details
