Pro Series 15K Fifth Wheel Trailer Hitch by Draw-Tite and Reese
- 15K Load Rating
- 3,750 lb. Pin Weight Rating
- 4-Way Pivoting Head
- Full 5 Degrees of Side-to-side Pivot for Easy Hook-Ups on Uneven Ground
- 13-1/2" to 17-1/2" Vertical Adjustment
- Side Bar Locking Mechanism
- Rounded Slide Bar Jaw Mechanism - designed for automatic self-latching
- Easy Installation and Removal for Full Access to Truck Bed
- E-Coat Finish for Long Lasting Good Looks
- Universal Mounting Kit Included (# 6005)
- Universal kit will not work on Nissan Titans
Kwik Slide
Designed for shortbed trucks to provide turning clearance and prevent damage to truck and trailer in tight places at low speeds. Without a slider, a 45 degree turn may cause damage. However, with a slider and a minimum 13" Pin Box Extension, an extra 9" of clearance eliminates interference on turns up to 80 degrees.
- 10" Travel Fore and Aft
- Adjustable with Trailer Attached
Note: 13" Minimum Extended Pin Box on Trailer is Recommended.
|
|
|
| Trailer turning with and without Kwik Slide |
The Kwik Slide Motion |
Note: Fifth Wheel Hitch should not be used on trucks with beds shorter than 6' in length.
Master Lock Shrouded Padlock (# 37DAT) works on securing the jaw mechanism on the Pro Series head and can also be used with the pull pin lock plates (# 58093) to lock the fifth wheel hitch to the rails in the truck bed.
See Larger
