Universal Cam-Door Lock for Enclosed Trailers

Redline Enclosed Trailer Parts - 383200

This plain-finish Cam-Lock is for all van bodies, trucks and trailers. It is ideal for side door and rear door enclosed cargo trailer applications. The Lock can be installed on flush to 3/4" offset doors. A bridge-type Keeper prevents accidental opening and ensures safe locking action. The positive double action handle gives dual protection against jarring in transit.

Measurements:

• 3/16" Thick Bearing Covers
• 1-3/4" Maximum Lock Protection
• 1/2" Square Padlock or Seal Eye
• 1-7/8" Width of Keeper
• 13/52" Diameter Mounting Holes for pipe brackets and holders
• Uses 3/4" I.D. Pipe (not supplied)
• Handle measures 13-3/4" long and gets welded to the pipe (not included)

Product shown with lock (lock not included.

Replaces 5654x

Customers Who Purchased This Enclosed Trailer Parts Also Bought...

Ask the Experts about this Redline Enclosed Trailer Parts
Do you have a question about this Enclosed Trailer Parts?

• Availability of Hidden Hasp Locks for Universal Cam-Door Lock # 383200
  
• The Master Lock Hidden Shackle Padlock, part # 970DPF will work with the Universal Cam-Door Lock, part # 383200. These locks can be purchased keyed alike. When ordering, simply select the keyed alike option in the drop down menu. Unfortunately, we cannot get this particular lock keyed alike to a different padlock or tongue lock. In the future, if you decide you would need additional locks with the same key number as those you had ordered before, we could special-order them from Master Lock.
  view full answer...


• What Size Pipe is Needed to Complete the Installation of the Door Cam Lock
  
• You will need 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding is required for installation of this kit. We also have the 36 inch Lock Side-Door Bar Lock Assembly, item # 305736, that is ideal for use on trailer side doors that may be smaller than rear doors. This item is complete and does not require welding for installation.
  view full answer...


• Door Lock Recommendation for a Ramp Style Trailer Door
  
• If you have a ramp style door that swings down and becomes a ramp what I recommend you do is purchase 2 separate 36 inch Lock Side-Door Bar Lock Assemblies, part # 305736, and mount one on either side of your door. This way you will get a handle and hinge on either side of the door like you want.
  view full answer...


• Where Can I Get a 3/4 inch Bar to use with the Lock Side-Door Bar Lock Assembly # 383200
  
• You will need to go to a hardware to get a 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding is required for installation of this kit. We also have the 36 inch Lock Side-Door Bar Lock Assembly, item # 305736, that is ideal for use on trailer side doors that may be smaller than rear doors. This item is complete and does not require welding for installation.
  view full answer...


• Recommendations for Converting a Barn Trailer Door to a Ramp Door
  
• To convert your barn door on your Wells Cargo enclosed trailer to a ramp door I would recommend you use the Universal Cam-Door Lock for Enclosed Trailers # 383200 that you referenced as well as a 3/4 diameter pipe that you will need to get from a hardware store. For a hinge mechanism, if the current hinges you have are not adequate, I would recommend you get three 1/2 inch Diameter Greasable Hinge Pins # HP12412G to use as door hinges. You might also be interested in purchasing a Ramp Spri
  view full answer...