6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends)

Hopkins Wiring - 37995

6-Pole Square Trailer Wiring Connector Kit

• Square Design 6-Pole
• Includes Both Male and Female Ends for Car and Trailer
  • Wire leads on each trailer and vehicle end measures 11-3/4"
  • Pigtail wires are 18 gauge

TAP # 37995 / Hopkins # 47995

Customers compare 37995 to these similar products

Adapter 4 Way Flat to 6 Way Square for Jayco$28.95

Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector$17.45

Adapter 4 Pole to 7 Pole and 4 Pole$22.95

Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End$5.99

Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End$5.99

Customers Who Purchased This Wiring Also Bought...

2 Wire Loop, 12" $4.95

Wire Frame Clip $0.17

Bonded 3 Wire - per foot $0.51

7-Way Molded Trailer Wire Connector, 3' Long $14.95

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Ask the Experts about this Hopkins Wiring
Do you have a question about this Wiring?

• Adapter for Jeep Grand Cherokee 6-Pole to 7-Pole
  
• We do not have an adapter that will work, but we do have the parts to make your own. This will allow you to plug in your square 6-Way trailer connector to the round 7-Way vehicle connector. You will need to purchase two parts to make this work for your Jeep Grand Cherokee. First you will need the 6-Pole Square Trailer Wiring Connector Kit, product number 37995. You will be able to split this item, and wire it to work with the 7-Way Trailer Connector, either metal, item PK12702, or plasti
  view full answer...


• 6 way square to 4 way flat connection not working on 1997 Dutchman Pop-UP Tent Trailer
  
• As long as your vehicle is wired properly, Green right turn and stop, Yellow left turn and stop, Brown running lights and White ground, then you will have to figure out how the trailer is wired. If the adapter you are talking about was purchased and not hard wired then it could be the 4-way flat to 6-way square adapter for a Jayco RV, item # 30104, and those adapters are wired differently than most other trailers with 6-way connectors and this could be why your lights are not functioning properl
  view full answer...


• What is the Wire Gauge on the 6-Pole Square Trailer Wiring Connector # 37995, for a 1993 Saturn SW2
  
• I went out to the warehouse and grabbed one of the 6-Pole Square Trailer Wiring Connectors, item # 37995, and all of the wires are the same 18 gauge wires. I agree with you that a larger wire would be the best way to go for installation of a power wire to a trailer. The 18 gauge wiring is used to match the trailer wiring these connectors are installed on. I would change the trailer connector to match my vehicle by using a 6-Way Molded Trailer Wire Connector, 3 foot, item # H20032, or a 7-Way
  view full answer...


• Converting 6-Way Square to 4-Way Flat on a Honda Odyssey
  
• There are a number of wiring situations for the 6-Way square connector. Your trailer may have a battery, trailer brakes and/or backup lights, along with the tail lights, left stop and turn light, right stop and turn light and ground wire. You said your trailer has a battery. If the battery circuit was somehow connected to the vehicle lighting circuits, you may have damaged the converter attached to the trailer wiring harness that switches the Odyssey 3 wire system down to the trailers two wir
  view full answer...


• Connecting a Coachman Pop-Up Trialer with 6-Way Square Connector to a Vehicle with a 7-Way RV
  
• To use your trailer with a vehicle that has a 7-Way connector installed on it you would be best suited to just use the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End, item # PK12706, and hard wire it directly to the wires on the trailer. You will then have the functionality needed to provide power to the trailer brakes and have power to maintain a battery on the trailer if it is so equipped. Another advantage is that you will have no need for an adapter between the
  view full answer...


• Where To Connect 2 Extra Wires From 6-Way Connector On Motorcycle Trailer To 4 Wires On Motorcycle
  
• I looked up the Escapade motorcycle trailer and it showed the six wire colors as being: White - Ground Brown - Taillights Yellow - Left Turn Green - Right Turn Red - Brake Circuit Black - Accessory Terminal on Bike You will want to use a circuit tester like the Quickee Tester, part # 3808, and test the function of the four wires on your motorcycle. They will most likely be ground, taillights, left turn/brake, and right turn/brake. You will want to wire the black wire on the trailer
  view full answer...


• How to Install the Hopkins 4 Pole to 6 Pole and 4 Pole Wiring Adapter # 37175 on a 2002 Dodge Ram
  
• Since you have a battery on the trailer you will want to use something larger than a 4-Way connector. A 4-Way will only supply lighting on your trailer. It will not be able to provide a wire to charge your trailer battery. I would recommend to use the Hopkins 4 Pole to 6 Pole and 4 Pole Wiring Adapter, part # 37175. This adapter will install on your vehicle and allow you to have a 6-Way connector and also a 4-Way connector. You would plug in the 4-Way on your vehicle to the back of this adapt
  view full answer...


• Adding a Trailer Wiring Harness to a 2002 Dodge Durango to Tow a 1996 Jayco Trailer
  
• We can get you set up to tow your Jayco trailer with the 6-Way connector. First, on your 2002 Dodge Durango, you will need to install Tow Ready Custom Fit Vehicle Wiring, # 118334. I have included a link to the installation details and a link to a video showing a typical installation for you to view. The 6-Way square plug is a rarity. What I recommend is replacing the 6-Way on the trailer with a 7-Way RV style connector. It will be fairly simple. You will just need a 7-Way connector, # PK127
  view full answer...


• Converting a Trailer with a 6 Square Connector to a 4-Way Flat Trailer Connector
  
• If the trailer is a Jayco trailer, you will just need Adapter # 30104, to go from the 4-Way flat on the 2006 Honda Odyssey to the 6 square on the trailer. If the trailer is a different brand, this adapter will not work. Instead, you will need to convert one of the connectors to be compatible with the other. If you convert the trailer, the other 2 functions on it will be lost unless you converted it back again. If you converted the vehicle, it will only be compatible with trailers that have a
  view full answer...


• Connecting 6-Pin Square Connector on Harley Bike to 5-Pin Round Connector on Trailer
  
• If the 6-pin square connector is the factory connector on your Harley I would recommend keeping the 6-pin and using the Hopkins 6-Pole Square Trailer Wiring Connector Kit, part # 37995 you have referenced and plug the trailer end connector in the kit into your 6-pin square on your Harley. Then, wire the pigtail wires on the other end of the trailer end connector to the Pollak 5-Pole, Round Pin Trailer Wiring Socket, part # PK11502. You will need to use a circuit tester like the Quickee Tester,
  view full answer...


• Troubleshooting Left Turn Signal on Dutchman Duck Pop-Up Camper
  
• The Jayco Adapter you mention, part # 30104 will only work with Jayco campers. It sounds as if you have two separate issues going on. The issue with all of the lights flashing is caused by an insufficient ground connection. Check the ground connection for the trailer connector on the tow vehicle, make sure it is connected securely to non-corroded metal. The camper itself will also have a ground connection, usually on the trailer tongue. Follow the white wire back toward the camper from the tr
  view full answer...


• How to Make a 6-Way Square to 4-Way Flat Trailer Wiring Adapter
  
• The 6-Way square trailer connector is not used by a lot of trailer manufacturers. A lot of Jayco trailers may have them but mostly you come across the 4-Way flat, like what you have on your trailer, and the 7-Way blade for RV applications. What I recommend is to convert the 6-Pole on the Monaco to a 4-Way. You can do this very easily by removing the 6-Way plug, and then testing the wires for function using a circuit tester like # 3808 if needed before installing them in a new 4-Way, # HM48030
  view full answer...


• Trailer Wiring Adapter for a 2012 Harley Trike To Tow an Escape Motorcycle Trailer
  
• I did some research and found that the Escape trailers use a square 6-Way like # 37995 that you have referenced. From what I could find, the Harley trikes use a round 5-Way. No matter what is on the bike you will need to change one connector or the other. If it is easier to change the trailer side, you will just need to use a trailer side 5-Way that matches the bike 5-Way. If it is round, we have # PK11501. You will need to remove the plug on the trailer and attach the wires from it to the b
  view full answer...


• Running Lights Do Not Work on Yakima Rack and Roll Trailer Pulled with a 2008 Saturn Vue
  
• The first step I would take is to check the vehicle side and trailer side connectors for any corrosion or dirt build up that could cause a bad connection and clean it out. If the connectors look clean, then you should use a circuit tester, # 40376, to check the trailer connector on the back of your 2008 Saturn Vue. Make sure you are getting a signal at each pin when that function is activated. I have attached a video of my co-worker testing a 4-flat trailer connector for you to reference.
  view full answer...


• Trailer Hitch Wiring Recommendation for a 1998 Jayco Pop-Up Trailer
  
• Yes, you could use the 6-Pole Square Trailer Wiring Connector Kit # 37995 on your 1998 Jayco Pop-Up trailer. If you have a 4-way on your tow vehicle you may also be interested in purchasing a Adapter 4 Way Flat to 6 Way Square for Jayco # 30104. With this product you could just plug this into your tow vehicle and then into your trailer and you would be ready to go. By doing this you will lose 2 functions of the trailer wiring, most likely one of them being a 12-volt power source.
  view full answer...