Hopkins Wiring - 37325
Converts from 6 pole round adapter on your vehicle down to 4 pole flat adapter.
| If your truck has the connector on the left, and your trailer has the connector on the right, you will want this adapter.
|
|
|
| Vehicle End |
Trailer End |
Similar to 37308 and PK12717
Hopkins # 47325, TAP # 37325
Customers Who Purchased This Wiring Also Bought...
Ask the Experts about this Hopkins Wiring
Do you have a question about this Wiring?
- Both Turn Signals Blink On Trailer When Brake and Signals are Applied at the Same Time
- The first thing I would check is the trailer side and vehicle side connectors for any dirt or corrosion and clean it out. That could cause a short circuit situation. I would then move on to checking the grounds on the trailer. The main ground should be connected to a bare metal surface on the trailer frame.
Most trailer tail lights ground through the mounting studs unless there is an obvious ground wire. In either case, you will want to make sure the grounds are attached to clean, corrosion f
view full answer...