Hopkins Wiring - 37308
Converts from 6 pole round adapter on your vehicle down to 4 pole flat adapter.
| If your truck has the connector on the left, and your trailer has the connector on the right, you will want this adapter.
|
|
|
| Vehicle End |
Trailer End |
Similar to 30700 and 37325
Customers Who Purchased This Wiring Also Bought...
Ask the Experts about this Hopkins Wiring
Do you have a question about this Wiring?
- How Does 6-Way to 4-Way Adapter Work
- The 6-Way is not wired as you think. One is for ground, one is for tail light, one is for R turn/brake, one is for left turn/Brake, one is for trailer brakes, and the last is for either reverse lights or 12V power. The last wire may be omitted if not needed.
A 4-Way has the following wires: White - ground, brown - tail light, green - right brake/turn and yellow - left brake turn.
Turn signals, in essence over ride the brake signal since they are the same bulb or filament. Because they are
view full answer...
- Adapting Motorcycle with 4-Pole to Trailer with 6-Way Connector
- You will need a converter/adapter when connecting different wired vehicles. Depending on how your vehicle and trailer are wired we have three 4 to 6 wire adapters.
Adapter 4 Pole to 6 Pole # 30637
Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter # 37175
If your trailer has brakes you will need a brake controller and for a motorcycle you will need a model that has time delay functionality. I would recommend the Activator II by Draw-Tite, part # 5500. This will work with the ad
view full answer...
