See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Trailer Hitch


36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408Trailer Hitch 36408

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch

Rating: ratingratingratingratingrating
35 reviews


Code:   36408

Retail:$237.52

Price:$128.95

Shipping Weight: 32 pounds

Shipping Special
Quantity: 




Draw-Tite Trailer Hitch - 36408

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

  • Custom fit is designed specifically for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar, pin and clip are sold separately
  • Made in USA


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.




36408 Draw-Tite Class 2 Trailer Hitch Receiver



Video of Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Hitch Install 2010 Chevy Equinox2
Trailer Hitch Installation - 2010 Chevrolet Equinox
Video hitch install 2007 chevy equinox
Trailer Hitch Installation - 2007 Chevy Equinox
Video install trailer hitch 2005 chevrolet equinox 36408
Trailer Hitch Installation - 2005 Chevrolet Equinox
Video Hitch Install 2006 Pontiac Torrent
Trailer Hitch Installation - 2006 Pontiac Torrent

Video Transcript for Trailer Hitch Installation - 2010 Chevrolet Equinox

Today on this 2010 Chevrolet Equinox we are going to install part number 90145 from Hidden Hitch. This will also apply to part number 36408 from Draw-Tite. The first thing we need to do on our Chevrolet Equinox is remove this little knockout on the bottom of the bumper, this little fascia. Take this off to give us room to put the hitch into place. Looking underneath the passenger side of the vehicle, these are the two holes that we are going to attach the hitch to. 00:39

It is a good idea to spray them down a little with some lubricant and get some of the dust and grime out of there. Give it a test fit with your bolts first. Make sure they thread in and out okay. If they have some junk in there you can use a nylon tube brush to help clean out the threads too. This brush is part number 814092. We will clean out all of the bolt holes that we have on the vehicle, these two on the side and plus the two on the bumper. 01:09

At this point we can start installing the hitch on to the vehicle and it is a good idea to have an extra set of hands to help hold it up so make sure the center tab goes up underneath the bumper around the plastic and then we will put the hitch in position and just get one of the bolts started to hold it up there. Leaving the hitch loose we will work the other bolts into place. We are just going to get them started. Leave them loose and we are going to do that on both sides of the vehicle. With the hitch still loose so we can move it around we will install the bolts that go into the bumper structure. 01:42

Now that we have got all of our bolts started we can snug them down and then torque them down as specified in the instructions. When you tighten the center bolts up you can see how the hitch will pull itself into position. You can see with the hitch installed how the bumper fascia we had to take off has to stay off so there is room for the hitch. We have got the vehicle off the ramp, now we will give you a couple of hitch measurements to use on certain hitch accessories. From the top of the receiver tube down to the ground is 14-1/ 2 inches. From the center of the hitch pin hole out to the edge of the bumper is going to be 5-1/ 2 inches. With that, that already finishes our install of part number 90145 from Hidden Hitch.


This Product Fits The Following Vehicles

2005 - 2012 Chevrolet Equinox

2010 - 2012 GMC Terrain

2006 - 2009 Pontiac Torrent

2002 - 2003 Saturn Vue

2004 - 2007 Saturn Vue except Red Line




Customers Who Purchased This Trailer Hitch Also Bought...






Customer Reviews  -  Write a review about this product

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

Average Customer Rating:  ratingratingratingratingrating4.9 out of 5 stars   (35 Customer Reviews)




Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: glen e06/15/2011

Is this review helpful?


Very easy installation. fit perfect Product was not secure in packaging, one end went through the cardboard package. No damage to hitch, though. 17023



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Clarence Boesenberg01/26/2012

Is this review helpful?


Received hitch for 2012 Equanox in just a few days. I am 85 years old. I used 4 by4s to block hitch up until it was about in place.then used shims until outside holes lined up. I put 1 bolt on each side then put bolts in bumper,put in rest of bolts tightend them and had job done in about an hour. Good product.Good service30411



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Tim M01/19/2012

Is this review helpful?


Installation went well according to the instructions, However the fishing wire provided was about eight inches too short.29943



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Jerre R.01/05/2012

Is this review helpful?


This product arrived fast and was simple to install29105



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Sherman N11/23/2011

Is this review helpful?


It ls what was expected. Fast shipping. will use e-trailer.com again27342



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Tony G.10/12/2011

Is this review helpful?


Installed hitch & wiring in just over an hour!! Very easy installation & video was great help with wiring install. Shipping was very fast also! Ordered on a Friday & hitch was here on Monday morning!! I am very pleased with the service from etrailer.com. This is second hitch I have purchased from them; & delivery & installation on both were definitely more than to my satisfaction!!25485



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Jim S.10/07/2011

Is this review helpful?


Free upgraded shipping , installation videos and brand names. I will shop here again.25225



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Darrell M.09/30/2011

Is this review helpful?


The hitch arrived on time. Instillation was a little more difficult than I expected. Probably because I was working on the ground and not from a lift and I'm old. It just took a little longer. Electrical connections required more body panel removal than I'm use to, but other than that all went well. It looks good on the car and my boat is very happy. I'll recommend you to all of my friends......both of them.24928



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Jonathan W09/27/2011

Is this review helpful?


Holy Cow these guys are fast. I couldn't believe the hitch got here so fast. It was exactly as ordered, it did take a little longer to put on because of the rust in the frame. Next time I need a hitch or anyone I know, I will recommend these guys24695



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Mark D.09/12/2011

Is this review helpful?


Went together very well. The only thing that I can say is that the wire screw holder was about 6" too short. I had to attach rope to the end to get the screw and brackets thru the back of the Vue. Other than that it went great. Acutally fun to put together!!!23751



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Anna H.09/06/2011

Is this review helpful?


Extremely quick service. Ordered on Tuesday and it was delivered on Thursday. A friend just put it on my vehicle today and said it took him only about 30 minutes from start to finish, so now I'm good to go on mounting a bike rack to transport my bike to the south for the winter. Great company to deal with and would definitely purchase from them again.23630



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: John V.08/29/2011

Is this review helpful?


I first ordered a drawtite trailer hitch for my 2004 Saturn Vue, so that I could install a hitch mounted bike carrier. I received the hitch the next day by UPS! It fits perfect using the existing holes in the vehicle frame. The only problem I encountered were the corroded threaded holes on my frame. I had to use a 12mm thread tap to clean out 7 years of rust. After that it bolted up perfectly!23031



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Chad H.08/11/2011

Is this review helpful?


Service was fast, and all questions were answered in a fast and professional manner. I received the part I ordered very fast, although there were no instructions. 21616



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Reggie D.08/05/2011

Is this review helpful?


I've always had my hitches installed on my vehicles by professionals. But this time I installed my own hitch and it was very easy. It did not take but 30 minutes to install with the easy to follow instructions. My hitch will be used to carry our two bike carrier.21231



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Leed08/02/2011

Is this review helpful?


A tool needs to be added to the istallation instructions. During shipment, the ends of the hitch got bent. I used a small sledge to straighten them out. Once that was done, the hitch slipped right into place. Installation couldn't have been simpler. I was able to do it by myself by slightly screwing in the center bolts first, then the end bolts and finally snugging down the center bolts.20923



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Brent B.07/28/2011

Is this review helpful?


Installed draw-tite 1 1/4# receiver on 2007 Saturn view. 1. the "piano wire gizmo" for threading bolts through bumber was cut way too short. It would not even fit from bolt hole to end of bumper. Should have been about 1 foot longer just to be workable. I extended with extra piano wire and everything pulled through fine. 2. Middle bolts were almost impossible without tiny hands. Luckily my wife is good at many things, and her smaller hands were able to fit in to attach nuts to bolts. Thought it might be easier if bolts were slightly longer (1/4 inch). Just a little too close fitting both washer and nut. 3. Youtube video is a must. Watched 2 of them for about 7 minutes total. Really did a good job letting you know what had to be done. 7 minutes saved a lot of time on the install. Overall: Very pleased with etrailer and hitch. A longer threading gizmo would have made for an excellent rating instead of a very good. I would definitely use them again and would recommend them to a friend.20501



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Berny D.07/14/2011

Is this review helpful?


installed this Hitch (#36408) on my 2011 GMC Terrain the next day (7/6/11) and all went very well except that I had to bend the passenger-side upright support about one inch outward, in order to fit in place and bolt in. The hitch may have been dropped on that side during shipping and was sticking out from the carton, but I was able to straighten it out to fit...all is perfect! 19410



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Berny D.07/08/2011

Is this review helpful?


I searched the internet and found a great place (etrailer.com) to order a vehicle hitch, with respect to Service, Delivery and Value. All of the staff at etrailer far exceeded my highest expectations in all respects. On Thursday afternoon (June 30, 2011) I placed my order, with a 3 day holiday in between (July 4th/Independence Day) and received the Hitch & Wiring Kit on Tuesday July 5, 2011...5days!... How can you beat that!...Pictures may follow! Etrailer.com has a video (on line) to assist you with the installation of every hitch and wiring kit...this company has their act together! The follow up after the sale is also great! Thanks!...etrailer... A happy customer!...Berny D.18935



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Suzanne H.07/04/2011

Is this review helpful?


Trailer hitch fit perfectly. Arrived promptly and in good condition. Bolts were wrong for my 05 Vue, though. Hitch came with 1/2" bolts, welded nuts on car were 7/16". Instruction illustrations were accurate, written directions could have pointed out a key step -- to make sure washer and carriage bolt were fished through the bumper separately -- the washer wouldn't go through if the bolt was already inside. Clearly shown in the pic, but not described in written directions. Otherwise, smooth sailing.18483



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Mike C. , Norman Ok.06/13/2011

Is this review helpful?


Ordered the Draw-Tite hitch receiver for my wife's 2006 Equinox on 6/8/11.It got here today 6/13/11 ,and I installed it in about an hour.Great job! We are impressed with your service, and the hitch receiver.Thank you etrailer!16910



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Brian Trettin06/08/2011

Is this review helpful?


Going to be great for pulling wood and pulling the family fishing boat!16495



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Dominick04/27/2011

Is this review helpful?


Great order procesing and very fast shipping . They keep me informed from the very start to the end. I really liked that they had a video of the instalation of my hitch. It was so easy to install you would have to be helpless to install this hitch. I HIGHLY RECOMEND THIS PRODUCT AND etrailer.12491



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Harold M.04/27/2011

Is this review helpful?


Fast delivery and easy installation...Perfect fit with all the necessary hardware. Very easy to do business with....Thank you...H.12468



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Brian W.04/24/2011

Is this review helpful?


eTrailer shipped the Draw-Tite hitch right away and I received it within the week. The installation video was great and accurate...it only took about 15-20 minutes for me to install the hitch on my Chevy Equinox. Everything went "without a hitch" and I am no longer without a hitch! 12291



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Gerry W.04/02/2011

Is this review helpful?


I shopped 4 sites for the best value on this hitch and the wiring kit for my 2011 Equinox. eTrailer had the best price and free shipping, and I learned soon after ordering that they provide EXCELLENT service. The hitch arrived so fast I hadn't gotten motivated enough yet to get down under the vehicle to install it, but when I did, the installation (hitch and wiring kit) was easy and quick thanks to the very clear instructions provided. I'm very happy to have done business with eTrailer.10954



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Robb Schweininger04/02/2011

Is this review helpful?


The hitch arrived on time and packaged well. I have installed 5 hitches in the last 8 years and this one was the easiest and quickest to install. Installation took about 10 minutes. I will definately recommend etrailer to my friends!10946



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Les Smith04/01/2011

Is this review helpful?


Excellent service-Arrived on time World class communication! -Installed easily on our Equinox-No need for a lift-Saved the need to pay for installation-This is my second hitch from E Trailer and will use it primarily to tow my boat.I also I also purchased the wiring harness and had no problem installing it, 10918



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Dave L03/29/2011

Is this review helpful?


The hitch was great but the package did not hold up so well. The hitch was out of the package on the end and loose in the box. There was no damage to the hitch. I will order from you again!!!10593



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Dennis O03/23/2011

Is this review helpful?


I have not installed the item as of yet, but out of the box it appears to be of good quality and comes with all of the hardware necessary for a proper installation.10168



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Charlie T of Iowa03/17/2011

Is this review helpful?


Talk about an easy install. Both the hitch and the wiring to about 20 minutes and most of that time was gathering up the few tools I needed. It was a 1 person job for sure and it couldn't be simpler. If you can't install one of these hitches and wiring, you probably shouldn't check your own tire pressure either.9563



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Norm C.02/02/2011

Is this review helpful?


Trailer hitch was divivered yesterday and I installed it yesterday.It looks great. Thanks.6540



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Andy01/13/2011

Is this review helpful?


Great Deal I ordered this receiver on the 9th and it was here on the 12th. Free shipping(and fast). Didn't get home from work until 8:30pm and had the hitch installed by 9:15. Looks great and of course a good name in hitches. Super easy to install by yourself. Came with the pin. Have yet to install the wiring harness, but I primarily purchased this for transporting bicycles and using other receiver type accessories. Having large metric tools will help with the install, but not absolutely necessary, a 3/4" socket with a 1/2" drive will work well. I only wish I had this option for my last car years ago. Thanks!!!!5424



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Steve S.12/19/2010

Is this review helpful?


Trailer hitch & Cargo carrier The oder process was easy, the updates on the product availability, then shipping, all the way to my door step. I particularly like the installation videos. That helps a ton.4353



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: Satisfied Torrent Owner06/22/2010

Is this review helpful?


perfect fit for me This is the best value I found on a quality product ... simple to install (about 1/2 hour), perfect fit and looks great from what you can see of it (hidden nicely).3157



Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - 36408

ratingratingratingratingrating by: John Henry05/29/2009

Is this review helpful?


Awesome Fit Fit my 2008 Equinox perfectly, and installed quickly and easily. The hitch is barely visible from behind the vehicle, but can be seen if you are really looking. Seems very stout. Couldn't ask for a better fit!1909




Ask the Experts about this Draw-Tite Trailer Hitch
Expert Answers about Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36408                                             Do you have a question about this Trailer Hitch?


  • Will 2010 the Draw-Tite Class II Trailer Hitch Receiver, Part Number 36408, Fit The 2010 Equinox
  • I spoke with my contact at the manufacturer and engineering has just gotten to the Class II trailer hitches for 2010 Equinox and the Class II, part number 36408, will fit your vehicle. Some items you may need with the Class II hitch are as follows, Drawbar 36051, Use in rise position only. Pin and Clip PC2 Ball 19256 or 19258 Wiring Harness 118432 Hitch Lock 5200 or 7682
    view full answer...

  • Does the BCM Need to be Reprogrammed to Install a Trailer Connector Harness on a 2010 Chevy Equinox
  • I spoke with my contacts at Curt and Tow Ready, who both make wiring harnesses for the 2010 Chevy Equinox. They stated you will NOT have to reprogram the BCM or anything else to install the Curt T-Connector, # 56094, or T-One with Upgraded Circuit Protected Modulite, # 118494. I recommend the T-One with Upgraded Circuit Protected Modulite, # 118494, as it has a powered Modulite that will help protect your vehicles sensitive wiring. I have included a link to the installation details below. I h
    view full answer...

  • Availability of an Anti-Rattle Device For a 1-1/4 Trailer Hitch on a 2005 Saturn Vue
  • Hitch, ball mount, and/or accessory rattle can be annoying and it is a common ailment. Luckily, there is a cure. First, you can make sure that your trailer has the correct tongue weight. Tongue weight should be 10 to 15 percent of gross trailer weight when it is loaded and ready to tow. If tongue weight is correct, you can use an anti-rattle device. I recommend the Anti-Rattle Wedge, # 93347. It is designed to fit in 1-1/4 inch trailer hitches like # 36408 on your 2005 Saturn Vue. When the w
    view full answer...

  • Towing Dirt Bikes and a Trailer
  • The Draw-Tite Class II Trailer Hitch, item # 36408, would work great for towing a small trailer, as long as it does not weigh more than 3500 lbs (trailer + load). However, I usually recommend that people at least consider going with a Class III hitch when they have the choice. A Class III hitch, like item # 75681, would allow for greater flexibility in the future, as you will have a better selection of accessories, such as a cargo carriers and bike racks.
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com